Performance
Bulb size |
T8 |
Rated power |
30 W |
Luminous flux |
2400 lm |
Bulb power |
30 W |
Bulb lifetime (@50% failures EM) |
22000 h |
Chromaticity coordinate X |
382 |
Chromaticity coordinate Y |
379 |
Design temperature |
25 °C |
Luminous efficacy |
80 lm/W |
Fitting/cap plate |
Green plate |
Bulb lifetime (@10% failures EM) |
19000 h |
Color Rendering Index (CRI) |
85 |
Color temperature |
4000 K |
Dimmable |
Y |
Mercury content |
3 mg |
Technical details
Bulb voltage |
100 V |
Lamps quantity |
1 |
Power
Energy consumption (1000 hours) |
36 kWh |
Bulb current |
350 mA |
Additionally
Energy efficiency compliance |
A |
Colour code |
840 |
MASTER TL-D Xtra, 30W, G13, 4000 K, 55000 h
<b>Long life fluorescent lighting</b>
This TL-D Xtra lamp offers a longer lifetime and guarantees fewer early failures. This results in low maintenance costs and saves on expensive spot replacement. It is therefore suitable for places where lamp replacement is expensive due to high ceilings or disturbance of operations. This lamp can be operated on existing gear or dedicated HF Xtreme gear.
<b>Product Benefits</b>
- Longer lifetime results in lower maintenance costs, less waste and disposal costs at end-of-life
- Less hassle due to fewer early failures
- Facilitating the change from spot to group replacement.
<b>Product Features</b>
- Extra long lifetime; longest lifetime is achieved with specially designed Philips HF Xtreme gear
- End-cap has an x-shaped green bottom plate to distinguish the lamp from other fluorescent lamps
- Low mercury dose (3mg)
<b>Environment</b>
- Good environmental choice because of long reliable life (190% better than T8 standard colors), low waste (only one lamp compared to three T8 standard colors)
- This product is RoHS compliant
- This product is covered by WEEE
<b>Application</b>
- Suitable for use in applications where maintenance costs are high (high ceilings, dicult to reach): department stores, supermarkets, warehouses, production halls and public areas like car parks and railway stations.
<b>Warnings and Safety</b>
- To achieve published lifetimes for 100% operation, do not dim below 30%
- When used on electromagnetic gear, it is strongly recommended to apply only Philips S10 or S10E starters (for 18 W types S2 or S2E) to achieve the published lifetimes, and to install new starters when relamping.
- A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.