Performance
| Rated power |
58.5 W |
| Luminous flux |
5100 lm |
| Bulb power |
58 W |
| Bulb lifetime (@50% failures EM) |
22000 h |
| Chromaticity coordinate X |
435 |
| Chromaticity coordinate Y |
403 |
| Design temperature |
25 °C |
| Luminous efficacy |
87 lm/W |
| Fitting/cap plate |
Green plate |
| Bulb lifetime (@10% failures EM) |
19000 h |
| Color Rendering Index (CRI) |
85 |
| Color temperature |
3000 K |
| Dimmable |
Y |
| Mercury content |
3 mg |
| Bulb size |
T8 |
Technical details
| Bulb voltage |
108 V |
| Lamps quantity |
1 |
Power
| Energy consumption (1000 hours) |
68 kWh |
| Bulb current |
665 mA |
Additionally
| Colour code |
830 |
| Energy efficiency compliance |
A |
MASTER TL-D Xtra Secura, 58W, G13, 3000K, 55000 h, 311.2 g
<b>Long life, shatterfree fluorescent lighting</b>
This TL-D Xtra lamp has a protective coating that keeps glass and lamp components together in the event of accidental breakage. The lamp is easily identifiable by a blue ring at one end. Application areas are all places where glass shatters can disturb operations and can have an impact on product and people safety, e. g. the food and beverage industry. The lamp has a Teflon coating. It is compliant with HACCP regulations.
<b>Product Benefits</b>
- Protective Teflon coating keeps glass and lamp components together in case of accidental breakage; allows use in open and closed luminaires in food & beverages industry
- Easy identification in audit situations by blue ring at one end
- Special fluorescent coating gives good color rendering
- Extra-long lifetime and reduced early failures mean lower maintenance workload and costs, and facilitate change from spot to group replacement
- Reduced waste and disposal costs at end-of-life
- Compliant with HACCP regulations and supports HACCP certification
<b>Product Features</b>
- Protective coating (Teflon) around the lamp, indicated by one blue ring at one end
- Extra-long life and high reliability, identified by x-shaped end-cap to distinguish the lamp from other fluorescent lamps
- Recommended to use with electronic gear that allows higher ecacy and longer lifetime
- Use in open and closed luminaires possible (as indicated by one blue ring), due to strong, temperatureresistant coating
<b>Environment</b>
- Good environmental choice because of long reliable life (190% better than T8 standard colors), low waste (only one lamp compared to three T8 standard colors)
- This product is RoHS compliant
- This product is covered by WEEE
<b>Application</b>
- Food & beverages and pharmaceuticals industry: factories, distribution centres, retail outlets; locations where maintenance costs are high (high ceilings, dicult access)
<b>Warnings and Safety</b>
- To achieve published lifetimes for 100% operation, do not dim below 30%
- When used on electromagnetic gear, it is strongly recommended to apply only Philips S10 or S10E starters (for 18 W types S2 or S2E) to achieve the published lifetimes, and to install new starters when relamping.
- A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner.
- It’s strongly recommended to replace Secura lamps before or at the moment the specified lamp life (50% failures @ 3 hrs switching cycle) is reached.
