Data transmission
MAC address table |
1000 entries |
Store-and-forward |
Y |
Supported data transfer rates |
10/100Base-TX |
Switching capacity |
1.6 Gbit/s |
Maximum data transfer rate |
0.1 Gbit/s |
Throughput |
1.19 Mpps |
Networking
Auto MDI/MDI-X |
Y |
Full duplex |
Y |
Networking standards |
IEEE 802.3, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x |
Flow control support |
Y |
10G support |
N |
Power
Power consumption (typical) |
65 W |
AC input voltage |
100-240 V |
AC input frequency |
50/60 Hz |
Output power |
55 W |
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity |
8 |
DC-in jack |
Y |
Operational conditions
Operating relative humidity (H-H) |
10 - 95% |
Storage temperature (T-T) |
-40 - 70 °C |
Storage relative humidity (H-H) |
0 - 95% |
Weight & dimensions
Depth |
135 mm |
Weight |
1000 g |
Width |
217 mm |
Height |
43 mm |
Design
LED indicators |
Link |
Certification |
FCC, CE |
Rack mounting |
N |
Power over Ethernet (PoE)
Power over Ethernet (PoE) |
Y |
Additionally
Colour of product |
Black |
Operating temperature range (T-T) |
0 - 40 °C |
FSD-804P - 8-Port 10/100Mbps, 4-Port PoE, Auto MDI / MDI-X, 1.6Gbps, 1K MAC, 65 W, 1 kg
Cost effective centralized power distribution
For cost saving and flexible using of PoE power provision, half of the 10/100Mbps TP ports of FSD-804P provide PoE power injector function which is able to drive 4 IEEE 802.3af compliant powered devices.
For SOHO or department network, the switch also provides a simple, cost-effective, and highly reliable network connection for data as well as power. Furthermore, it is the ideal device for bridging Ethernet to Fast Ethernet workgroups or networks.
Easy Cabling Installation
With data and power over Ethernet from one unit, the FSD-804P shall reduce cables and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power lowering the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords. We are also proud of the key feature – energy saving. With more efficient switching power supply, the efficiency of the FSD-804P would be much better than four linear power adapters in a long run.
Providing 4 PoE interfaces, the FSD-804P is ideal for small business and workgroups requiring to deploy the PoE for the wireless access points, IP-based surveillance camera or IP phones in any places easily, efficiently and cost effective.
Key Features
Interface
- 8-Port 10/100Mbps Fast Ethernet ports
- 4-Port support 48VDC power to PoE Powered Device
PoE
- Complies with IEEE 802.3af Power over Ethernet End-Span PSE
- Up to 4 IEEE 802.3af devices powered
- Support PoE Power up to 15.4 watts for each PoE ports
- Auto detect powered device (PD)
- Circuit protection prevent power interference between ports
- Remote power feeding up to 100m
Switching
- Hardware based 10/100Mbps Auto-negotiation and Auto MDI / MDI-X
- Flow control for Full Duplex operation and back pressure for Half Duplex operation
- Integrates address look-up engine, support 1K absolute MAC addresses
- Automatic address learning and address aging
Hardware
- 10-inch desktop size, rack mountable; 1U height
- LED indicators for POE ready and POE activity
- Optional Rack Ear Accessories Kit for 10-inch cabinet (RKE-10A) and 19-inch cabinet (RKE-10B)
- 1 silent FAN to provide stable and efficient power performance