PreSonus PRM1 Stage/performance microphone Wired Black

3-pin XLR, 20 Hz - 20 kHz, -37 dB, 132 dB SPL, 150g The PRM1 Precision Reference Microphone is a special type of condenser microphone that provides an accurate reproduction of a room's sound characteristics for use with audio-analysis tools such as real-time analyzers (RTAs) and spectrographs.

A reference, or “measurement,” microphone is condenser microphone that is designed to provide an accurate reproduction of a room's sound characteristics for use with audio-analysis tools, such as real-time analyzers (RTAs) and spectrographs. While measurement microphones can be quite expensive, the affordable PreSonus® PRM1 delivers high-quality results.

The PRM1 employs a 1/4” pre-polarized electret-condenser capsule and requires phantom power. It has an omnidirectional polar pattern, meaning it is equally sensitive in all directions. This allows the microphone to measure reflections, as well as direct signals, providing an accurate depiction of the room.

This mic can handle up to 132 dB SPL and exhibits linear (“flat”) frequency response between 20 Hz and 20 kHz, so it won’t color the sound.

A microphone with a linear frequency response captures all frequencies equally within its specified response range, neither boosting nor cutting frequencies, so it accurately reproduces the incoming signal. This makes it ideal for measuring what a room or speaker is doing to the outgoing signal in a sound system.

The PRM1 has a narrow dynamic range, since it is intended to receive test frequencies, such as pink noise, at a fixed level. Therefore it is not recommended for recording purposes. But it’s the right mic for tuning a sound system to reproduce those tracks accurately in a room.

While the PRM1 can be used for a variety of measurement applications, such as MLSSA™, Spectrafoo™, and TEF™, it is especially recommended for use with PreSonus Virtual StudioLive™ software with Smaart Measurement Technology™ and PreSonus StudioLive 24.4.2 and StudioLive 16.4.2 digital mixers. With this combination, you can have a complete, powerful, and affordable, audio-analysis and correction system.

VSL’s Smaart System Check Wizards step StudioLive 24.4.2 and 16.4.2 users through the process of viewing the frequency-response trace of a venue, calculating and setting delay-system timing, and verifying output connectivity. To use them, you need to connect a measurement microphone to the StudioLive mixer’s Talkback input.

That’s where the PRM1 comes in. With the PRM1 mic, a StudioLive mixer, and VSL with Smaart, it’s easy to do tasks that once required extensive engineering know-how. For more information about Smaart technology in VSL, click here.

The PRM1 has an all-metal chassis and comes with a clip, foam windscreen, and hard case.