Loudspeakers
| Woofer |
Y |
| Subwoofer driver diameter (imperial) |
1.75 " |
| Woofer diameter (imperial) |
10 " |
| Number of drivers |
1 |
| Number of speakers |
1 |
| Number of woofer drivers |
1 |
| Recommended usage |
DJ |
| Woofer diameter |
254 mm |
Audio
| Peak Music Power Output (PMPO) |
2000 W |
| Sensitivity |
129 dB |
| Frequency range |
56 - 20000 Hz |
| Impedance |
40 Ω |
Additionally
| Wireless technologies |
Wired |
Multipurpose 2-way, 25.4 cm (10 ") cone transducer, 56 Hz to 20 kHz, 129 dB, 1000 W, 14.5 kg, Black
K10 features include:
- 10” Woofer; 1.75” diaphragm compression driver
- 90° Nominal coverage angle
- Maximum SPL 129 dB peak
- 1000-watt continuous Class D power modules in all models
- Onboard mixer with two combo XLR and 1/4 ” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
- Extensive DSP enhances system performance
- DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
- Intrinsic Correction™, first featured in our high-end line-array products maps 65–75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
- DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
- GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.
- Attractive and professional appearance
- Rugged ABS enclosures
- Functions as a monitor wedge
- 16-gauge powder coated steel grille
- Comfortable ergonomic handles
- 35 mm pole sockets with Tilt-Direct™
- M10 rigging points
- Eyebolt and yoke mount accessories available
