Data transmission
| MAC address table |
8000 entries |
| Number of trunks |
8 |
| Number of VLANs |
4000 |
Networking
| Port mirroring |
Y |
| Broadcast storm control |
Y |
| VLAN support |
Y |
| Auto MDI/MDI-X |
Y |
| Flow control support |
Y |
| 10G support |
N |
Power over Ethernet (PoE)
| Total Power over Ethernet (PoE) budget |
65 W |
| Power over Ethernet (PoE) ports quantity |
4 |
| Power over Ethernet (PoE) |
Y |
Management features
| Web-based management |
Y |
| Quality of Service (QoS) support |
Y |
Ports & interfaces
| Basic switching RJ-45 Ethernet ports type |
Gigabit Ethernet (10/100/1000) |
| Copper ethernet cabling technology |
1000BASE-T, 1000BASE-TX, 100BASE-T, 10BASE-T |
| Basic switching RJ-45 Ethernet ports quantity |
8 |
Performance
| Packet buffer memory |
0.176 MB |
Protocols
| Management protocols |
IGMP |
8-P Gigabit Web-Smart PoE Switch
RP-PEG080W supports 8 10/100/1000Mbps Auto-negotiation, Auto-MDIX Ethernet ports and Power over Ethernet to IEEE 802.3af compliant devices. It’s fully compliant with the standards of IEEE 802.3/u/x/z/ab/af. With web-based management, the network administrator can logon the switch to monitor, and configure. In addition, the switch implements the QoS (Quality of Service), Port Mirror, VLAN, LACP, LAN security, Multicasting video stream protocol, and SNMP v2c. It is suitable for SMB application.
PoE allows power to be supplied to end devices, such as Wireless Access Point IP cameras or VoIP Phones, directly through the existing LAN cables. By supplying the power mid-span, you can centralize power distribution and backup without the need to increase infrastructure. RP-PEG080W supports up to 4-port 15.4W PoE function and RP-PEG080WF supports up to 8-port 15.4W PoE function.
- PoE Save Your Power Infrastructure and Installation Cost.
- Port Mirroring helps supervisor monitoring network.
- IEEE802.1x Access Control improve network security.
- 65 or 130 watts of total power diversified options.
