Projector
Projector brightness |
1500 ANSI lumens |
Projection technology |
LCD |
Uniformity |
85% |
Other features
Resolution |
1024 x 768 pixels |
Analogue video signal |
15-pin |
Performance
Dot clock scanning frequency |
140 MHz |
Vertical scan range |
100 Hz |
Lens system
Focal length range (f-f) |
22.5 - 27 mm |
Lamps
Lamp type |
UHP |
Bulb power |
180 W |
Additionally
Display scan frequency (horizontal) |
100 kHz |
Ultra Portable MultiMedia LCD Projector PLC-SU70
The compact design (294.5 x 69.5x 208 mm) and lightweight body (2.4 kg) let you make presentations almost anywhere.
The PLC-XU73 series uses a 200-watt UHP lamp* for outstanding brightness and well-balanced color reproduction. The PLC-XU73 and PLC-SU70 provides 2,000 lumens brightness. The PLC-XU70 provide 1,500 lumens brightness.
Digital Realized Interpolation Technology (DRIT) for supporting input signals with resolutions from SXGA to VGA by compressing/decompressing signals.
The PLC-XU73 series projector has two D-sub input terminals. One of these can be switched and used as a monitor out terminal.
No need to wait for the projector to cool down. You can disconnect the power cord right after your presentation.
To compensate for keystone (trapezoidal) picture distortion, the PLC-XU73 series provides vertical keystone correction with a correction range up to ±20 degrees.
In addition to its 1.2x optical zoom, the PLC-XU73 series features a 1/2x to 16x digital zoom that lets you easily enlarge or reduce the screen display size as desired.
The intelligent Fan Operation Linear Control System reduces cooling fan noise according to changes in temperature.
The 3D Automatic Uniformity Correction Control (AUCC) circuit ensures a uniform projected image, balancing uneven color and brightness gradations for more natural image displays.
The PIN code lock function prevents others from operating the projector without inputting the correct PIN code. The key lock function, which is set from the operation menu, locks the operation of the top control and remote control buttons.
This mode lets you use a blackboard as a projection screen*. It adjusts the colors to make images look similar to those projection to an ordinary white screen.
You can select either mode at start-up. Countdown mode ensures that the lamp has reached sufficient brightness before projecting the image. Immediate mode lets you project the image as soon as the power is turned on, even if the optimum level of brightness has not been reached.
The PLC-XU73 series employs three 0.6-inch polysilicon thin-film transistor LCD panels for projection of true XGA (1024 x 768) resolution images with a total of 2,359,296 pixels.
A progressive scan circuit ensures superb, high-resolution video images.
The Luminance Transient Improvement (LTI) and Color Transient Improvement (CTI) sharpens the detail.The result is clearer, sharper images from both RGB and video sources.
Select the most appropriate gamma correction mode from among Standard, Cinema, Real (for graphics) and four user settings.