Hard drive
| Track to track seek time (read/write) |
0.3 ms |
| Read seek |
4.4 ms |
| Average latency |
3 ms |
| Hard drive size |
3.5 " |
| Write seek |
4.9 ms |
| Full stroke seek |
12 ms |
| SCSI interface type |
Ultra320 SCSI |
| Hard drive capacity |
147 GB |
| Hard drive speed |
10000 RPM |
| Hard drive interface |
SCSI |
| Drive device, buffer size |
8 MB |
| Component for |
Server/workstation |
| Bytes per sector |
512 |
| Hard disk number of heads |
8 |
Power
| Input voltage |
5, 12 V |
| Power consumption (idle) |
10.3 W |
Operational conditions
| Operating shock |
63 G |
| Non-operating vibration |
2 G |
| Operating vibration |
1.5 G |
| Non-operating shock |
250 G |
Other features
| Sustained data rate |
72 MB/s |
147.1GB HDD, Ultra320, 8.89 cm (3.5 ") , 10000rpm, 8Mb
Introducing the Maxtor Atlas™ 10K IV drive, the industry’s fastest and largest performing 10K RPM hard disk drive. Its 147GB capacity point and 4.3 ms seek time provide just the right combination of performance and capacity to meet mainstream enterprise hard disk drive market requirements. The Atlas 10K IV drive provides up to a 24% increase in sustained data transfer rates and delivers 5% faster seek times than prior 10K RPM hard disk drive generations. The drive is equipped with the Maxtor second-generation Ultra320 SCSI interface, which includes MaxAdapt™, Maxtor’s implementation of Adaptive Active Filtration technology. MaxAdapt is a closed-loop method of improving signal quality by amplifying the fundamental frequency of the signal in the receiver while filtering noise and other undesirable components. MaxAdapt allows the drive to adapt to changing system conditions and components. This translates into lower error rates, easier integration, and increased bus efficiency for optimal system performance. MaxAdapt is only available on Maxtor SCSI hard disk drives. The Atlas 10K IV drive is designed to handle the most demanding high-bandwidth and high-capacity enterprise server applications.
