Ports & interfaces
Serial ports quantity |
2 |
Host interface |
PCI-X |
Other features
Ports quantity |
4 |
PCI Bus |
32-bit PCI |
Mac compatibility |
N |
Platform |
PC |
Compliance industry standards |
16950 UART |
Data transfer rate |
0.11 Mbit/s |
Sigma JJ-P29012-S6 Siig - CyberSerial Dual 950 Serial Adapter - 2 x 9-pin D-Sub, Universal PCI card design with built-in 128-byte FIFO buffers to work in 32-/64-bit, 3.3V/5V PCI and PCI-X slots
Features
- Supports 32-/64-bit, 3.3V/5V PCI and PCI-X slots
- Two high-speed 16950 UART serial ports (9-pin) support data rate up to 920 Kbps
- Will work as standard RS232 port or with 5V or 12V power output for devices that require power (such as handheld scanners, table scanners, POS displays, etc.)
- Built-in 128-byte FIFO buffers dramatically increase data transmit/receive speed, especially under Windows multitasking environment
- 4-layer PCB board: separate layers for data & grounding. Greatly reduces signal noise & loss. Delivers more reliable high-speed data transfers
- Enhanced bracket design to prevent bending. Connected to PCB with washered screws for a more secure connection
- Supports 3.3V operation with 5V tolerance
- Conforms to PCI v2.2 universal card standard. PCI-X & 64-bit compatible
- Supports PME - (Power Management Event). Allows device to request a change in system power state (wake up system)
- Use SMT (Surface Mount Technology) type electrolytic capacitor. Low ESR (Equivalent Series Resistance) aluminum electrolytic capacitor. Offers much improved noise suppression & achieves higher levels of performance/reliability
- Use SMT (Surface Mount Technology) type crystal. Offers cleaner design than traditional DIP-type crystal. Provides greatly improved grounding, which reduces EMI emission & improves performance/reliability