Protocols
| Supported network protocols |
TCP/IP, NetWare, AppleTalk, NetBIOS/NetBEUI, DLC/LLC |
| Web-based management |
Y |
| Management protocols |
SNMP v1/v2 |
Networking
| Ethernet LAN data rates |
10, 100 Mbit/s |
| Network connection type |
Ethernet LAN |
| Copper ethernet cabling technology |
100BASE-T, 10BASE-T |
Operational conditions
| Operating altitude |
0 - 3100 m |
Technical details
| Built-in display |
N |
| IPP support |
Y |
| Internal |
Y |
| Bidirectional |
Y |
| Firmware upgradeable |
Y |
Software
| Mac operating systems supported |
Y |
| Linux operating systems supported |
Y |
Ports & interfaces
| Parallel ports quantity |
1 |
| Serial ports quantity |
1 |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
1 |
10/100Base-T, IEEE1284 40-pin, RS-232 UART, RJ45, WEP/WPA/WPA2, 5.0VDC, LEDs
The SX-350 is an internal parallel print server designed specifically for OEM applications.
- Complete internal OEM network printing solution
- 802.11a/b/g wireless and 100Base-T/10Base-T Ethernet
- Works with all major operating systems and network operating systems
- Minimal hardware and firmware changes required in OEM printer
The SX-350 is an internal multiprotocol print server designed to allow OEM printer manufacturers and printer controller manufacturers to easily add wired and/or wireless network printing capabilities to their products. Because it uses a simple internal Centronics/IEEE1284 parallel port-compatible ribbon cable connection to the printer, there are minimal hardware and firmware changes required to the OEM device.