Security
Transmission distance |
1000 m |
Operating frequency |
433 MHz |
Sensor type |
Infrared sensor |
Type |
Wireless |
Detection distance |
100 m |
Power
Power consumption |
500 mA |
Rechargeable battery |
Y |
Wireless 100m Perimeter Beam for SHB60S & SHB100S systems
- Creates a virtual fence to protect entrances, perimeters, patios, garages etc…
- Provides an Early Warning of intruders before they reach buildings
- Virtual Fence can be up to 100m long
- Solar powered and wireless for simple installation
- Up to 1000m (Line of Sight) transmission range
The SMART-I SHB60 Wireless 100m Perimeter Beam works in conjunction with the SMART-I SHB60S and SHB100S systems. It creates a virtual fence that detects any object that crosses it. The Perimeter Beam is supplied as a pair and communicates back to the 4 Zone receiver supplied with the SHB60S and SHB100S systems. When the virtual fence is crossed the 4 Zone Receiver will play a melody through its built-in speaker and notify the SMART-I Smart Alarm Gateway.
The beams can be mounted on a pole or a flat surface using the brackets supplied and are designed for indoor (optional 12V DC 500mA power supplies are recommended for permanently powering each beam if using them indoors) or outdoor use. They can be fitted at any height (allowing them to ignore shorter objects like dogs or foxes) and can be up to 100m apart, creating a 100m Virtual Fence. They are perfect for protecting entrances to a property, the perimeters of a property and even for protecting windows, patios and garages. As they can be mounted outside and do not create false alarms as an object must cross in order for them to be triggered they can provide an Early Warning that a property has intruders on it, long before those intruders attempt to enter any buildings on the property.
The beams are battery powered and also incorporate solar panels for charging the battery. The beams transmit back to the receiver using the long range 433MHz frequency, allowing them to be sited up to 1000m (Line of Sight) away from the receiver.
The receiver has 4 Alarm Outputs on the back of it, one for each zone. With the SHB60S and SHB100S systems a SMART-I SHUM Wireless Single Zone Alarm Input Interface is supplied for connecting one of these Alarm Outputs wirelessly to the SMART-I Smart Alarm System. This allows the receiver to trigger the SMART-I Gateway when the beams in that zone are triggered. The SMART-I SHUM Wireless Single Zone Alarm Input Interface transmits Alerts back to the Smart Alarm Gateway using secure 868.3MHz technology. An additional SMART-I SHUM Wireless Single Zone Alarm Input Interface is supplied with these beams so that the beams can be put on a different zone if required. The Smart Alarm Gateway will then treat triggers on this zone independently from triggers on the other zones, so that separate actions can be programmed for different zones.