Wireless LAN features
| Channels quantity |
13 channels |
| Frequency band |
2.402 - 2.4835 GHz |
| Outdoor range |
352m |
| Spread spectrum method |
DSSS |
| Modulation |
CCK, DQPSK, OFDM |
Networking
| Networking features |
Fast Ethernet, Wireless LAN |
| Compliance industry standards |
IEEE 802.11b, IEEE 802.11g, IEEE 802.3, IEEE 802.3u, IEEE 802.3af, IEEE 802.3x |
Certificates
| Electromagnetic compatibility |
FCC Class B, CE, ETS 300.328, ETS 300 826 |
Security
| MAC address filtering |
Y |
| Security features |
Disabled SSID broadcast\nWireless client isolation |
Management features
| Management protocols |
Telnet, TFTP, SNMP |
| Logging and monitoring |
Syslog, Event logging |
| Management platform |
Web-based |
Antenna
| Antenna type |
Removable |
| Antenna connector type |
R-SMA |
Additionally
| Output power |
max: 18 dBm |
| Transfer rate (Mbps) |
54 Mbit/s |
| Wireless technologies |
Wired |
EliteConnect 2.4GHz Dual-Radio 802.11g Wireless Bridge
Designed to connect two or more separated Local Area Networks (usually
located in different buildings), the new SMC EliteConnect™ 802.11g
Wireless Bridge is the easiest alternative to a traditional wired network. It delivers high data rates, and allows personnel in a corporate campus environment to access all local and remote network resources. The new 802.11g Wireless Bridge is also a cost-effective solution by eliminating the need for expensive cabling and difficult-to-install leased lines.
SMC2585W-G bridges two or more wired LANs. Connected to the Ethernet backbone through an RJ-45 connector, the Wireless Bridge can also function as an Access Point, bridging between a wired LAN and one or more wireless mobile PC-based stations. The new EliteConnect 2.4GHz 802.11g Wireless Bridge connects difficult to-wire locations, branch offices, school or corporate campus environments, frequently changing workplaces, temporary LANs, hospitals and warehouses. The Wireless Bridge also allows multiple buildings to share a single Internet
connection.
SMC2585W-G has four operational modes: Bridge Repeater - in this mode both WLAN Interfaces are configured as LAN-LAN bridges. Static and Dynamic Repeater – in this mode one interface is configured for bridging and the other for access point functionality. Or, Dual Access
Point in which both radio interfaces are configured to accept wireless
clients.
SMC2585W-G EliteConnect™ Wireless Bridge supports advanced wireless
security features including 64-bit or 128-bit key WEP wireless data
encryption, 802.1x, Wi-Fi Protected Access (WPA), disabled SSID broadcast, wireless client isolation, and MAC address filtering to block unauthorized wireless clients. In addition, the new EliteConnect 802.11g Wireless Bridge provides multiple levels of protocol filtering (Ethernet, IP, TCP/UDP) to ensure network security.
The new EliteConnect™ 2.4GHz 802.11g Wireless Bridge also has flexible
management features. Web-based network management tools make configuration and remote management of the network simple. IT
professionals can also use Telnet or TFTP to quickly and easily manage
the device. In addition, SMC2585W-G supports SNMP allowing easy
integration of your wireless LAN with your wired infrastructure. Other
management features include a system log, event log and syslog.
SMC2585W-G comes with two detachable antennas. If extended range is
required, users can choose among the wide selection of SMC 2.4GHz
High Gain Antennas. The new EliteConnect Wireless Bridge also supports
Power over Ethernet that adheres to 802.3af standard (using optional
SMCPWR-INJ3). Power over Ethernet reduces installation cost by using
standard Category 5 cable to provide power to the Wireless Bridge.
