Certificates
| Electromagnetic compatibility |
IEC61000-3-2/IEC61000-3-3/IEC61000-4-2/IEC61000-4-3/IEC61000-4-4/IEC61000-4-5/IEC61000-4-6/IEC61000-4-8/IEC61000-4-11 |
Wireless LAN features
| Frequency band |
4.9 - 5.875 GHz |
Networking
| Number of users |
128 user(s) |
| Compliance industry standards |
IEEE 802.3/IEEE 802.3u/IEEE 802.11a/b/g |
Operational conditions
| Non-operating relative humidity (non-condensing) |
15 - 90% |
Antenna
| Antenna gain level (max) |
17 dBi |
| Antenna connector type |
2x N |
Additionally
| Transfer rate (Mbps) |
54 Mbit/s |
| Wireless technologies |
Wireless |
SMC2890W-AG EliteConnect Wireless Outdoor Bridge 802.11a or 802.11b/g wireless band.
<b>Overview</b>
- The EliteConnect 802.11a/g Wireless Outdoor Access Point/Bridge is designed to bridge two or more wired LAN’s (usually located in different buildings), while simultaneously providing wireless access to local or mobile users. The SMC2890W-AG/SMC2891W-AG incorporates a dual radio architecture to bridge over one wireless band and provide wireless client access over the other band. The Dual-Band Outdoor Access Point/Bridge is completely weatherproof and capable of being installed in a wide variety of different environments. It comes in two models, SMC2890W-AG and SMC2891W-AG, the latter with built-in 17dBi 5GHz antenna and uses Wireless Distribution System (WDS) to allow bridging between remote locations. Up to 6 WDS Bridge links are supported to remote LAN’s and branch locations. Using dual radio architecture allows for different bridging options using either the 802.11a or 802.11b/g wireless band. As an alternative if the bridging functionality is not required you can use both 802.11a and 802.11b/g in access point mode.
- The EliteConnect 802.11a/g Wireless Outdoor Access Point/Bridge is designed to bridge two or more wired LAN’s (usually located in different buildings), while simultaneously providing wireless access to local or mobile users. The SMC2890W-AG/SMC2891W-AG incorporates a dual radio architecture to bridge over one wireless band and provide wireless client access over the other band.
- The EliteConnect 802.11a/g Wireless Outdoor Access Point/Bridge is designed to bridge two or more wired LAN’s (usually located in different buildings), while simultaneously providing wireless access to local or mobile users. The SMC2890W-AG/SMC2891W-AG incorporates a dual radio architecture to bridge over one wireless band and provide wireless client access over the other band. The Dual-Band Outdoor Access Point/Bridge is completely weatherproof and capable of being installed in a wide variety of different environments.
