Data transmission
| MAC address table |
8192 entries |
| Store-and-forward |
Y |
| Supported data transfer rates |
10/100/1000 Mbps |
| Switching capacity |
17.6 Gbit/s |
| Maximum data transfer rate |
1 Gbit/s |
| Number of VLANs |
255 |
Other features
| Packet transfer speed |
13 Mpps |
| Connectivity LEDs |
Y |
| Available modules |
SX, LX, ZX |
| Expansion slots |
4 |
| Input frequency |
50 - 60 Hz |
| Power LED |
Y |
| Networking features |
Gigabit Ethernet |
| Power supply |
30 W |
| Power supply type |
AC/DC |
| Diagnostics |
RS-232 DB-9 |
| Management platform |
Telnet, SLIP, SNMP, HTTP |
| Optional transceivers |
SMC1GSFP-SX, LX, ZX |
| Installed ports |
52 |
| Remote administration |
Y |
| Slot type |
SFP |
Power
| Number of power supply units |
1 |
| Input voltage |
100 - 240 V |
| Input current |
0.12 A |
Security
| MAC address filtering |
Y |
| Access Control List (ACL) |
Y |
| Static port security |
Y |
| SSH/SSL support |
Y |
Management features
| Quality of Service (QoS) support |
Y |
| Web-based management |
Y |
| MIB support |
Y |
| System event log |
Y |
Performance
| Stackable |
Y |
| Memory type |
SDRAM |
| Packet buffer memory |
4 MB |
| Internal memory |
64 MB |
| Flash memory |
16 MB |
Networking
| Full duplex |
Y |
| 10G support |
N |
| IGMP snooping |
Y |
| Link aggregation |
Y |
| Spanning tree protocol |
Y |
Operational conditions
| Operating temperature (T-T) |
32 - 104 °F |
Ports & interfaces
| DC-in jack |
N |
| Copper ethernet cabling technology |
100BASE-TX, 1000BASE-T, 10BASE-T |
| Console port |
RS-232 |
| Gigabit Ethernet (copper) ports quantity |
4 |
| ExpressCard slot |
N |
| Basic switching RJ-45 Ethernet ports quantity |
52 |
Design
| Form factor |
1U |
| Safety |
UL, CB, TUV |
Power over Ethernet (PoE)
| Power over Ethernet (PoE) |
Y |
Protocols
| Management protocols |
SNMP, HTTP |
Additionally
| Jumbo Frames support |
Y |
| Wireless technologies |
Wired |
SMC6152PL2 EU 48-Port 10/100 Switch with IP-Clustering and 4 Gigabit-Ports
The SMC6152L2 is a feature rich SMB focused 10/100 switch. The switch has 48 10/100 ports plus 4 gigabit ports for extra uplink capacity. Also it is comes installed with clustering software which will enable grouping together of other SMC6100 or SMC8100 products. This 10/100 workgroup edge switch is designed to handle provide a flexible management architecture including clustering. It is capable of reaching up to 17.6Gbps with a non-blocking single chip switching architecture including the 4 gigabit ports. It provides cost-effective, Ethernet switching for bandwidth-intensive networks that require advanced switching features to ensure smooth transmission of mission critical data. The comprehensive security features include RADIUS, IEEE802.1x, SSH, SSL,TACACS+, and ACL. High port -density and 1U high, this switch is ideal for SMB workgroup installations
