Data transmission
| MAC address table |
8192 entries |
| Store-and-forward |
Y |
| Switching capacity |
3.2 Gbit/s |
| Throughput |
2.4 Mpps |
Networking
| Flow control support |
Y |
| Auto MDI/MDI-X |
Y |
| 10G support |
N |
| Full duplex |
Y |
Management features
| Quality of Service (QoS) support |
Y |
Performance
| Buffer size |
2000 KB |
| Auto-negotiation |
Y |
Power over Ethernet (PoE)
| Power over Ethernet (PoE) power per port |
30 W |
| Total Power over Ethernet (PoE) budget |
250 W |
| Power over Ethernet (PoE) ports quantity |
16 |
| Power over Ethernet (PoE) |
Y |
Ports & interfaces
| Basic switching RJ-45 Ethernet ports quantity |
16 |
| Basic switching RJ-45 Ethernet ports type |
Fast Ethernet (10/100) |
| Console port |
RJ-45 |
16 x 100 Mbps, Auto MDI/MDI-X, MAC - 8K, Buffer - 2MB, 2.51 kg
SMC Network’s SMCFS1601P 16-port 10/100M desktop PoE switch provides seamless network connections, integrating 100 Mbps Fast Ethernet and 10 Mbps Ethernet network capabilities.
The PoE ports can automatically detect and supply power to IEEE 802.3af/at-compliant Powered Devices (PDs). The electrical power is transmitted along with data in one single cable, allowing you to expand your network to where there are no power lines or outlets, to where you need to locate devices such as APs, IP cameras or IP phones, etc.
The SMCFS1601P is easy to install and requires no configuration. With its desktop design, outstanding performance and quality, the 16-port 10/100M PoE switch is an ideal choice for expanding your home or office network.
PoE Features
The SMCFS1601P can provide up to 30 Watts of power to attached devices, such as VoIP phones, wireless access points, surveillance cameras etc, all over existing Cat5.E/Cat6 cables. The switch can deliver up to 30 Watts on 8 ports, or up to 15.4 Watts on all 16 ports. The total PoE Power Budget is 250W. The switch eliminates the need for individual power sources for devices in the network, saving on costs for power cables and avoiding power outlet availability issues.
IEEE 802.3az Energy-Efficient Ethernet Support
When two 802.3az-compliant switches are connected, up to 56%* of power consumption can be saved.
Support for Quality of Service
When the switches receive a frame tagged with an 802.1p priority tag, it is placed in the appropriate priority queue. Priority queuing is useful in environments where timesensitive data, such as voice and video, are streamed across the network.
Auto MDI/MDI-X on Each Port
Support for Auto-MDIX means that no cross-over cables are required. Straight-through cables can be used for all connections.
