Management features
Multicast support |
Y |
Quality of Service (QoS) support |
Y |
Web-based management |
Y |
Data transmission
MAC address table |
8000 entries |
Store-and-forward |
Y |
Supported data transfer rates |
10/100/1000 Mbps |
Switching capacity |
52 Gbit/s |
Maximum data transfer rate |
1000 Gbit/s |
Number of VLANs |
4000 |
Other features
Connectivity LEDs |
Y |
Wi-Fi |
N |
Networking
Port mirroring |
Y |
IGMP snooping |
Y |
Flow control support |
Y |
DHCP client |
Y |
DHCP server |
Y |
10G support |
N |
Full duplex |
Y |
Performance
Memory type |
SDRAM |
Packet buffer memory |
0.512 MB |
Internal memory |
64 MB |
Firmware upgradeable |
Y |
Flash memory |
16 MB |
Ports & interfaces
SFP/SFP+ slots quantity |
2 |
Basic switching RJ-45 Ethernet ports quantity |
24 |
DC-in jack |
Y |
Copper ethernet cabling technology |
100BASE-TX, 1000BASE-T, 10BASE-T |
SFP module slots quantity |
2 |
Combo SFP ports quantity |
4 |
Security
SSH/SSL support |
Y |
MAC address filtering |
Y |
Protocols
Management protocols |
SNMP, SNTP |
Supported network protocols |
TFTP, FTP, HTTP |
Design
Safety |
CSA/NRTL, UL, TUV/GS, EN, IEC |
Power over Ethernet (PoE)
Power over Ethernet (PoE) |
Y |
Additionally
Wireless technologies |
Wired |
TigerSwitch, Gigabit Ethernet, 52Gbps, 512KB, 16MB Flash, 64MB SDRAM, 802.3x, 802.1D, 802.1w, 802.1s, 802.1Q, 802.1v, 802.3ad, 802.3af, QoS, IGMP, TFTP, FTP, HTTP, DHCP, SNMP, 5600 g
The TigerSwitch 10/100/1000 SMC8126PL2-F is an intelligent Layer 2 full-power PoE switch with 24
10/100/1000BASE-T ports, four of which are combo ports that are shared with four SFP transceiver slots and two additional SFP slots. The IEEE 802.3af Power over Ethernet (PoE) operates on all 10/100/1000 ports enabling IP phones or cameras to be installed without the need for extra power cables. It supports full-power PoE with 15.4W on all RJ-45 ports and comes installed with clustering software which will enable grouping together of up to 32 of other SMC6100 and SMC8100 switches. The SMC8126PL2-F is capable of reaching up to 52Gbps with a non-blocking single chip switching architecture. It provides cost-effective, Ethernet switching for bandwidth-intensive networks that require advanced switching features to ensure smooth transmission of mission critical data.