Performance
| Heat dissipation |
921.3 BTU/h |
| Noise level |
28 dB |
Projector
| Projector brightness |
2500 ANSI lumens |
| Projector native resolution |
XGA (1024x768) |
| Projection technology |
LCD |
Ports & interfaces
| Composite video in |
1 |
| VGA (D-Sub) ports quantity |
3 |
| Audio (L,R) out |
1 |
Lamps
| Lamp type |
UHP |
| Bulb power |
190 W |
The VPL-CX61 projector is ideal for use in the office, executive boardroom, classroom, gymnasium or even a mid-size auditorium.
Monitor Out
The projector can display the image simultaneously on a large screen and on an additional monitor (via a 15-pin D Sub connection), so that the user can face the audience and still see the information being shown.
Low Fan Noise
For an undisturbed presentation, quiet operation is very important. The noise level of the VPL-CX63 is 28dB in standard mode which is considered less than a whisper.
RS-232C
Connections include an RS-232C port for control of the projector.
Password Protection
When this function is activated a password is required to use the projector (if the password is lost, Sony is able to retrieve it).
Control Panel Lock
This function locks the controls on the top and side of the projector, to prevent unauthorised or unintentional use of the controls. Functionality can be switched 'on' or 'off'.
Off and Go
No cool down time needed, just switch off and pack away! The fan continues to cool the VPL-CX63 after the power supply is removed, enabling users to unplug the projector immediately after use, without damaging the lamp or optics. Other projectors need to remain connected to the power supply to cool the projector after use.
Direct On / Off
Ceiling mounted projectors notoriously remain on after the meeting concludes and the attendees leave the room which in turn burns unnecessary hours on the lamp and electricity. The VPL-CX63 can be set to skip the standby mode, so that it can be turned on / off directly using a main switch.
