Ports & interfaces
| VGA (D-Sub) output ports |
3 |
| RS-485 ports |
1 |
| HDMI ports quantity |
2 |
Hard drive
| Hard drive capacity |
3684 GB |
| Hard drive interface |
Serial Attached SCSI (SAS) |
| Maximum hard drive capacity |
4000 GB |
Video
| Display frame rate |
480 fps |
Additionally
| RS-232 port |
2 |
| Ethernet LAN (RJ-45) ports quantity |
4 |
4000 GB, 480 fps, HDMI, RCA-pin, Ethernet, 265 W
The NSR-1200/4T is a high capacity hard disk recorder that has a capacity of 4000 GB. This network surveillance server is an ideal solution for multi-camera monitoring, recording, and playback.
<b>Quick setup</b>
With the set-up wizard, you can set up the system in a simple manner. With Sony's IP cameras, the NSR-1200/4T detects the cameras instantly, which drastically reduces the time required for the system installation. Images from cameras are assigned to Monitor Layout automatically so that you can start monitoring instantly.
<b>Intuitive graphical user interface</b>
You can search, preview, and play back the recorded video with an intuitive user interface.
<b>UPS</b>
The NSR-1200/4T can be used with Uninterruptible Power Supply (UPS) equipment via the RS-232C port, protecting in the event of accidental power failure.
<b>HDMI outputs for "Full HD" displays</b>
You can view and monitor video via the HDMI interface with Full HD (1920 x 1080) displays. If you use megapixel cameras, you can view the full resolution image with such equipment. What's more, you can set a 6-screen display layout and still view VGA video in full resolution.
<b>MPEG4/JPEG dual stream</b>
Connected with the SNC-RX Series, SNC-DS10, SNC-DM110, and later models from Sony, the NSR-1200/4T can accept both JPEG and MPEG4 from the cameras at the same time. With a limited storage capacity, for example, you can monitor live video via JPEG at frame rates as high as 30 fps, and record video via MPEG4 at frame rates as low as 5 fps.
<b>IMZ-NS100 Series</b>
In the same series of software solution, Sony also provides the IMZ-NS101/ NS104/ NS109/NS116/ NS132 Intelligent Monitoring Software. This can be installed on your own Microsoft® Windows® server to monitor and control 1/4/9/16/32 network cameras, respectively. It features the same functionality and graphical user interface as the NSR-1000 Series. The supplied Controller Software can be used for the multiple NSR-1000 Series and IMZ-NS100 Series.
<b>Flexible user management</b>
All access is managed by user authorization, which is set by the system administrator. The administrator can simply provide a user with the prepared five levels of operational permission, or the administrator can give a user different permission levels for different accessible cameras/servers.
