SYBA SY-HUB50045

Combo USB 2.0 + LAN Internal / External Hub, 3x USB, 1x 10/100Base-T LAN Port This is the perfect combination of a USB hub and a network port all in one. It can be used as an external USB Combo Hub or installed inside a desktop computer.\n\nChipset: Asix AX88760\nOn-chip Power-on Reset Circuit Integrated\n\n<b>Front Panel:</b>\n- 3 USB 2.0 Ports\n- 1 RJ45 LAN Port\n- Activity LED Indicators\n\n<b>Back Panel:</b>\n- DC 5V Power Input Jack\n- USB Type-B Female\n\n<b>USB 2.0 Hub Specifications:</b>\n- Fully Compliant with Universal Serial Bus Specification Revision 2.0\n- Supports USB HS (480Mbps), FS (12Mbps) and LS (1.5Mbps) Modes\n- Multiple Transaction Translator (MTT) Provides Respective TT Control Logic for Each Downstream Port\n- Downstream Ports Support Power Management and Over Current Detection in both Individual and Gang Modes\n- Supports Compound-device (non-removable in Downstream Ports) by I/O Pin Configuration\n- Improved Slew Rate Controlled Output Driver for EMI Reduction\n- Internal Power-fail Detection for ESD Recovery\n\n<b>USB 2.0 10/100M Fast Ethernet Specifications:</b>\n- Integrates 10/100Mbps Fast Ethernet MAC/PHY\n- IEEE802.3 10Base-t/100Base-TX Compatible\n- Supports Twisted Pair Crossover Detection and Auto-correction (HP Auto-MDIX)\n- Supports both Full-duplex with Flow Control and Half-duplex with Backpressure Operation\n- MAC/PHY Loop-back Diagnostic Capability\n- Support Wake-on-LAN Function\n- >>Supports Suspend Mode and Remote Wakeup via Link-up, Magic Packet, MS Wateup Frame\n- >>Optional PHY Power Down During Suspend Mode\n- High Performance Packet Transfer Rate Over USB Bus Using Proprietary Burst Transfer Mechanism (US Patent Approval)\n- Supports USB to Ethernet Bridging or Vice Versa in Hardware