Features
Maximum load weight |
10 kg |
Surface type |
Brick |
Easy to remove |
Y |
Easy to apply |
Y |
Adjustable height |
N |
2 x hook, 10 kg
Adhesive Screw Round for Brick & Stone 10kg
tesa® Adhesive Screw Round for Brick & Stone with the patented nie wieder bohren. Technology for a secure hold on rough and solid surfaces indoors or outside and a secure hold of up to 10 kg per screw. The attractive design cover makes them perfect for objects with a visible mount. They’re easy to mount and there are no additional tools required as everything you need is included in the pack. Just apply the screw, inject the adhesive, wait for 12 hours and hang a hose-pipe holder, tool hook, whatever you want. You can use multiple screws to mount heavier objects – and they’re removable, too.
- For rough and solid surfaces like brick & stone
- Holds up to 10kg per screw or 20kg using 2 screws
- With design cover for visible applications
- Removable from firm surfaces
- Suitable for indoor and outdoor use
The tesa® Adhesive Screw Round for Brick & Stone with patented nie wieder bohren. Technology is designed to give a secure hold on rough and solid surfaces like brickwork and stone. Each screw can support 10 kg – using multiple screws increases the holding power. The simple but attractively designed covers makes them perfect for objects with a visible mount. They’re simple to mount and there are no additional tools required.
<b>How to apply – Step by step</b>
- Use a brush to get rid of as much grit or dust as you can from the surface to secure an optimal bond.
- Peel off the protective foil from the adhesive foam tape and lightly press the adhesive screw to the surface. The foam tape is only used to keep the screw in place while you apply the adhesive.
- Pierce the nozzle on the tube of adhesive and pop the key over the other end.
- Squeeze the adhesive into the bigger hole in the screw body by giving the key a twist. Continue until the adhesive begins to come out of the smaller hole and the cavity is filled evenly. Allow 12 hours for the adhesive to dry before you put weight on it.
- When dry, add the cover and then mount your object.
<b>Wall-mount just about anything on rough surfaces without a drill</b>
It’s always been a kind of a challenge to get screws into surfaces like brickwork and stone. You had to buy or borrow a drill – and specialised masonry drill bits – and make a lot of noise and mess. With a tesa® Adhesive Screw Round for Brick & Stone you can mount anything up to 10 kg per screw – or 20 kg using two of them – inside or outside without the need for any additional tools. The attractively designed cover makes mounting objects with visible mounting solutions feasible and still looking good.
<b>Super simple to use – even easier to remove</b>
To remove the screw, get a firm hold on it with a wrench and gently and slowly twist it until the screws comes loose, than pull it away from the wall. Residue can be removed with a glass scraper or a metal brush. Please be aware that the tesa® Adhesive Screws are removable from solid surfaces. If used on sensitive surfaces like plaster, the surface may be damaged.
Please use the Product Finder if you want to mount objects on other surfaces like glass, wallpaper, plaster or tiles and browse our other tesa® Smart Mounting Solutions.
Not suitable for any non-stick materials.