Features
| Countdown timer |
Y |
| Control type |
Buttons |
Time up to 19 hrs, wall mounting or table standing, 2 x 1.5 Volt AAA
'Shake Awake' digital countdown timer and stopwatch
with beep, flash or vibrate alarm, hours/minutes or minutes/ seconds display, with magnet and clip for fixing
Features:
- Count-up and count-down timer
- Hours / minutes or minutes / seconds display
- With beep, flash or vibrate alarm
- Up to 19 hrs. and 59 min./99 min. and 59 sec.
- With magnet and clip for fixing
- Batteries: 2 x 1.5 Volt AAA included
Operation:
- Open the battery compartment and in-sert the batteries. Pull off the protection foil on the display. The unit is now ready to use.
- Choose h/m (hours / minutes) or m/s (minutes/seconds) display by the sliding switch at the back of the instrument.
- Choose beep, flash or vibrate alarm by the sliding switches at the back of the instrument.
Count down timer:
- Push the h/m or m/s button to set the desired time.
- Push the Start/Stop button to start the countdown process.
- You can stop and continue the count-down by pushing the Start/Stop button.
- When the timer counts down to zero, the adjusted alarm signals will appear. To turn off the alarm, press the Start/Stop button.
- After the alarm has stopped the timer will recall the last selected time automatically.
- Push the h/m and m/s button at the same time to reset the timer.
Count up timer:
- Push the Start/Stop button to start the count up process.
- You can stop and continue the count up by pushing the Start/Stop button.
- When the timer counts down to zero, the adjusted alarm signals will sound. To turn off the alarm, press the Start/Stop button.
- After the alarm has stopped the timer will recall the last selected time automatically.
- Push the h/m and m/s button at the same time to reset the timer.
Mounting:
- Use the magnet or the clip at the back of the timer for fixing.
Maintenance:
- Replace the batteries when the display becomes weak or the alarm level declines.
- Do not expose the instrument to extreme temperatures, vibration or shock
- Clean it with a soft damp cloth. Do not use solvents or scouring agents.
- Please do not try to repair the unit. Contact the original point of purchase. Please change the batteries before complaining. No guarantee if the instrument is handled or opened improperly.
