Weight & dimensions
| Heatsink weight |
650 g |
| Fan weight |
160 g |
| Heatsink dimensions (W x D x H) |
117 x 140 x 158 mm |
| Fan dimensions (W x D x H) |
26.5 x 152 x 140 mm |
Performance
| Maximum airflow |
73.6 cfm |
| Minimum airflow |
16.9 cfm |
| Airflow |
125 m³/h |
| Type |
Cooler |
| Suitable for |
Processor |
| Number of fans |
1 fan(s) |
| Fan diameter |
140 mm |
| Supported processor sockets |
Socket AM2+, Socket FM2, Socket AM2, LGA 2011-v3 (Socket R), LGA 1151 (Socket H4), Socket FM2+, Socket FM1, Socket AM3, Socket AM3+ |
| Number of heat pipes |
5 |
| Heat pipes diameter |
6 mm |
| Thermal Design Power (TDP) |
200 W |
| Noise level (low speed) |
15 dB |
| Noise level (high speed) |
21 dB |
| Rotational speed (min) |
300 RPM |
| Rotational speed (max) |
1300 RPM |
Technical details
| Fan connector |
4-pin |
| Noise level |
21 dB |
300 - 1,300 U/min, 28,1 – 125 m/h, 15 – 21 d(A), 4-Pin PWM, 660 g
With the Macho Direct we offer a high-performance HDT CPU-Cooler. The Cooler is based on the well-known Macho design and is the first choice for price conscious users. The silent optimized cooler offers superior cooling performance with no frills at a very attractive price.
The original conception of the Macho has been maintained: The heat sink is aligned to the rear of the PC case, which ensures that even when using ram modules with high-rising heat spreaders no incompatibilities will arise. The aluminum cooling fins are perforated by a plurality of air holes, which counteract air accumulation between the cooling fins.
The Macho Direct makes use of the Heatpipe Direct Touch principle. A total of five high-performance 6 mm heatpipes provide the most efficient dissipation of the generated processor heat. The heatpipes are, as usual, in a convex form. This patented design of the heatpipes, which are intentionally not ground flat, gives the Macho Direct an outstanding cooling performance for a HDT cooler.
Another advantage of the HDT-Design is the reduced installation height. The HDT-Cooler is 4 mm lower than the Macho, so it will also fit in cases where the "normal" Macho is too high.
The special design of the heatsink’s aluminum fins allows for a particularly low air resistance. The additional perforation of the cooling fins acts against heat buildup between the individual lamellae layers and supports the efficient temperature reduction.
A temperature-controlled TY-140 Black (PWM) is included with the cooler. The fan has been optimized for the Macho Direct. With a rotation speed that ranges from 300 to 1,300 rpm the fan runs especially quiet. The TY-140 Black features a low-wear “Enhanced Hyper-Flow Bearing”.
The air flow varies between 28.7 and an impressive 125 m³/h. The proven fan with its unique design features the mounting points of a conventional 120 mm fan and has a larger inner diameter than conventional 140 mm fans. The fan is fitted securely to the heatsink with the included, revised fan brackets – specially designed anti-vibration pads allow for decoupled mounting.
A universal mounting kit is included with the Macho Direct that supports all current Intel- and AMD sockets (Intel LGA1156/1155/2011/1150/2011-3/1151 und AMD AM2/AM2+/AM3/FM1/FM2/FM2+).
Also included in the package is again our popular Thermalright Screwdriver, with the magnetic tip. The equipment is completed by the excellent Thermalright Chill Factor thermal paste (blister).
