Power
| Power consumption (read) |
2 W |
| Power consumption (write) |
2 W |
| Power consumption (off) |
0.1 W |
| Power consumption (idle) |
0.8 W |
| Input voltage |
5 V |
Hard drive
| Track to track seek time (read/write) |
3 ms |
| Hard disk number of plates |
1 |
| Average latency |
7.14 ms |
| Hard disk average seek time |
16 ms |
| Drive ready time |
2 s |
| Hard drive capacity |
80 GB |
| Hard drive speed |
4200 RPM |
| Hard drive interface |
Ultra-ATA/100 |
| Hard drive size |
2.5 " |
| Drive device, buffer size |
8 MB |
| Hard disk number of heads |
2 |
Other features
| Supported data transfer rates |
215.2 MBit/s - 424.8 |
| Drive devices burst data transfer rate (PIO) |
16.6 MByte/s |
| Drive devices burst data transfer rate (Ultra DMA) |
100 MByte/s |
| Acoustic pressure emissions |
26 dB |
| USB powered |
N |
| FireWire 400 |
N |
| FireWire 800 |
N |
| Internal |
Y |
Operational conditions
| Non-operating altitude |
-300 - 12000 m |
| Operating altitude |
-300 - 5500 m |
| Operating shock |
300 G |
| Non-operating vibration |
5 G |
| Operating vibration |
1 G |
| Non-operating shock |
800 G |
Additionally
| Fibre Channel |
N |
| Ethernet LAN connection |
N |
MK8050GACE - 80GB, ATA100, 6.35 cm (2.5 ") , 4200 rpm, 8MB
Toshiba Storage Device Division continues to reinforce its leadership by introducing its second range of industrial grade drives; MK4050GACE and MK8050GACE. The new drives have been especially designed through extensive work together with leading industrial manufacturers. These drives are based on specifications from the demanding automotive environment but are produced specifically for aftermarket suppliers entering the growing personal navigation device market as well as robotics, factory/industrial PCs and other critical industrial applications.
The 40GB and 80GB Temperature Enhanced Drives (TED) can endure extreme operating conditions in wide temperature zones from sub-freezing to extreme heat (-30° to 85° operating / -40° to 95° non-operating) whilst the spindle motor runs at 4,200 rpm. In addition, the MK4050GACE and the MK8050GACE can withstand operational shock of up to 300g and non-operational shock of 800g, providing a rugged and dependable option for many industrial automated machines.
