Transition Networks E-100BTX-FX-05(LHHT) 100Mbit/s 1310nm Single-mode network media converter

Fast Ethernet Media Converter, 100BASE-TX (RJ-45) [100 m/328 ft.], 100BASE-FX 1310nm single mode (SC) [40 km/24.9 mi.] Transition Networks's 100BASE-TX to 100BASE-FX Extended Temperature Media Converters make cost-effective integration of twisted pair and fiber optics in industrial environments easier than ever before.

- Extended Temperature Capable This converter is designed to operate in environments where ambient temperatures can rise to as high as 65°C (149°F).
- AutoCross™
Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
- Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
- Link Pass Through
Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.
- Far End Fault (FEF)
A troubleshooting feature that is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link.
- Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.
- The converter will also automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link.