Data transmission
| MAC address table |
8000 entries |
| Supported data transfer rates |
10/100/1000Mbps |
| Maximum data transfer rate |
1 Gbit/s |
Networking
| Port mirroring |
Y |
| Auto MDI/MDI-X |
Y |
| Flow control support |
Y |
| Broadcast storm control |
Y |
| VLAN support |
Y |
| DHCP client |
Y |
| 10G support |
N |
| Full duplex |
Y |
Management features
| Quality of Service (QoS) support |
Y |
Ports & interfaces
| Basic switching RJ-45 Ethernet ports quantity |
4 |
| SFP module slots quantity |
4 |
| SFP/SFP+ slots quantity |
4 |
| Gigabit Ethernet (copper) ports quantity |
4 |
Protocols
| Management protocols |
SNMP V1/2, Telnet, HTTP |
Power over Ethernet (PoE)
| Power over Ethernet (PoE) |
N |
4-port 10/100/1000BASE-T, 4x SFP, 8K MAC, UL, cUL
The MIL-SM4004TG series of layer 2 managed switches provide high performance non-blocking switching. The switch has 4 auto-sensing 10/100/1000BASE-TX RJ-45 ports and 4 dual speed 100/1000 SFP ports. Management features include port based, dynamic and static VLANs, GVRP, VLAN tagging, IGMP Snooping or querying, port mirroring, port security. Security includes static addressing, filtering and blocking of packets to identified MAC addresses. Four priority queues insure minimum delay for voice over IP or multimedia network data. Non-blocking 16 Gbps architecture assures rapid packet delivery while 8,000 MAC address table provides swift lookup and packet forwarding.
- IGMP query and snooping
- 802.1X Authentication
- Port Mirroring
- 8K MAC Address
- Telnet/Web-based management
- TFTP firmware upgrade
- Enable/disable ports
- Auto-Negotiation
- Forced modes, 10H/10H/100H/100F/1000F
- Auto-MDIX on all ports
- 802.3X Flow control
- Back-pressure
- X-Ring Support
- 1 Mbps Buffer
- Broadcast storm filter
- DHCP Client, Relay, Server
- SNTP and SMTP support
- MAC Address Security
- Bandwidth Allocation
- QoS port-based/Tag based, IPv4, Tos/IPv4, IPv6, DiffServ
- Ingress & Egress MAC address filter & static source MAC address lock
