Transition Networks Point System Internal 100Mbit/s Single-mode Green,Grey network media converter

100BASE-TX/100BASE-FX, 1 x RJ-45, 1310nm TX, 1550nm RX, SF, SM, 1 x LC, 20km Max <b>Features:</b>

- Round trip delay of only 40 bit times—far below the Class II rating of 92 bit times.
- Auto-Negotiation (802.3u). Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
- AutoCross. Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
- Link Pass Through. Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.
- Far End Fault (FEF). A troubleshooting feature that is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link.
- Automatic Link Restoration. Transition Networks's converters will automatically re-establish link in all network conditions.
- Pause (IEEE 802.3xy). Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.
- Remote Firmware Upgrade
- Point System Chassis. Can be used with any Point System Chassis.