Ports & interfaces
DC-in jack |
Y |
Fiber ports quantity |
2 |
Power
Input current |
1 A |
External power adapter |
Y |
Input voltage |
100-240 V |
Operational conditions
Operating altitude |
0 - 3000 m |
Additionally
Transfer rate (Mbps) |
1000 Mbit/s |
Wireless technologies |
Wired |
100/1000BASE-X, SFP Slot to 100/1000BASE-X, SFP Slot
The xBFFG family of Network Interface Devices (NIDs) is a remotely managed product that offers IP or IP-Less management methods for secure delivery of Ethernet services for business and mobile backhaul applications. With MEF 9 & 14 certification the xFBRM family ensures you are compliant with the latest standards. The xBFFG is a 10/100/1000Mbps product with advance features including – IEEE 802.3ah Link OAM, VLAN, QoS, Bandwidth Allocation and jumbo frame support.
- 10K Jumbo Frame Support
- MEF 9 & MEF 14 Carrier Ethernet Certification
- Two selectable remote management modes:
• IP-Based remote management
• In-Band OAM 802.3ah(remote device managed by local peer)
- SNMP
- AutoCross™ - Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
- Auto-Negotiation
- Pause (IEEE 802.3xy) - Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.
- Transparent Link Pass Through - Transparent Link Pass Through sends a link-loss signal over the fiber, instructing the remote converter to shut down the copper port—thus notifying the end device—while maintaining the fiber link between the two converters.
- Far End Fault (FEF) - A troubleshooting feature that is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link.
- Remote Loopback - This feature puts a converter in a special mode that enables the device to loop back the signal from the RX port to the TX port on either media for testing and troubleshooting purposes.
- Non-Intrusive Echo
- IEEE 802.1p™ QOS packet classification with 4 egress queues
- Ipv4 IP TOS and DiffServ QOS classification, IPv6 Traffic class
- IEEE 802.1q™ VLAN, 4096 entries
- Static MAC, 64 entries
- Double VLAN tagging (QinQ)
- VLAN Tunneling
- IEEE 802.1x™ Port based security
- RADIUS client
- RMON counters for each port
- Bandwidth allocation per port
- DMI Optical Management
- USB port for basic setup
- Cable diagnostic function for TP ports
- 8K MAC addresses
- Remote Firmware Upgrade