Power
| Input frequency |
47/63 Hz |
| Input voltage |
100-240 V |
Performance
| Wavelength |
1310 nm |
| Rx power (max) |
10.5 dBmW |
| Rx power (min) |
-20 dBmW |
| Link budget |
10.50 dB |
| Tx power (min) |
-9.5 dBmW |
| Maximum transfer distance |
10000 m |
| Fiber mode structure |
Single-mode |
| Tx power (max) |
-3 dBmW |
Networking
| Duplex system |
Full |
| Ethernet LAN data rates |
10, 100, 1000 Mbit/s |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Wireless technologies |
Wired |
| Transfer rate (Mbps) |
1000 Mbit/s |
10/100/1000Base-T to 1000Base-SX/LX Gigabit Ethernet Media Converter, 1 x RJ-45, 1 x SC, SM, 10 km max, PoE+
The SGPAT10xx-100 is a 10/100/1000Base-T to 1000Base-SX/LX Gigabit Ethernet Media Converter, which allows two different types of network segments to be connected easily and affordably while also injecting PoE+ power through the copper RJ-45 port. PoE allows for the transmission of power over the same copper cables used to transmit data. PoE+ media converters are Power Sourcing Equipment (PSE). This AC powered media converter combines data received over a fiber optic link with 56VDC power to provide power and data to Powered Devices (PD) over unshielded twisted pair cabling while complying with IEEE802.3at PoE+ and also backwards compatible with IEEEE802.3af standard PoE.
The converter includes a PD signature sensing and power monitoring features. Other features include over-current protection, under-current detection, and fault protection input. Link Pass Through and Remote Fault Detect allows the media converter to monitor both the fiber and the copper ports for the loss of a receive (RX) signal and propagate the failure on to the end devices.
