Ports & interfaces
| WAN connection |
Ethernet (RJ-45) |
| DC-in jack |
Y |
Packaging content
| Cables included |
LAN (RJ-45) |
Antenna
| Integrated antenna |
Y |
| Antenna type |
PIFA |
| Antenna gain level (max) |
3 dBi |
| Antennas quantity |
2 |
Power
| Input voltage |
100 - 240 V |
| Power over Ethernet (PoE) |
Y |
| Input frequency |
50 - 60 Hz |
| Power supply |
15 W |
Performance
| Ethernet LAN data rates |
1000 Mbit/s |
| Wi-Fi data rate (max) |
300 Mbit/s |
| 2.4 GHz |
Y |
| 5 GHz |
Y |
| Networking standards |
IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
| Reset button |
Y |
| Firmware upgradeable |
Y |
| Certification |
CE, FCC |
| Frequency band |
2.4 - 5 GHz |
Security
| Security algorithms |
WPA2 |
| MAC address filtering |
Y |
Design
| Internal |
N |
| Cable lock slot |
Y |
| LED indicators |
Y |
Weight & dimensions
| Depth |
40 mm |
| Weight |
285 g |
| Width |
165 mm |
Protocols
| Supported network protocols |
IPv6 |
Additionally
| Transfer rate (Mbps) |
300 Mbit/s |
| AC adapter bundled |
Y |
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Operating temperature range (T-T) |
0 - 45 °C |
N600, 2.4GHz + 5GHz, 802.11a/b/g/n, 300Mbps, Gigabit Ethernet, PoE, 16 SSID
- Concurrent dual band 300 Mbps wireless N
- Create up to 8 SSIDs per band
- Define Access Point, WDS AP, WDS Bridge, or Repeater modes
- No need to install the device near a power source with PoE installation
- Manage traffic shaping per SSID
- Off-white low profile housing blends into environment
- IPv6 support
TRENDnet’s N600 Dual Band PoE Access Point, model TEW-753DAP, is a feature rich business class access point with proven concurrent
300 Mbps dual band wireless technology. A variety of installation scenarios are supported with Access Point, WDS AP, WDS Bridge, and
Repeater modes. Save installation time and costs with PoE.