Design
| Protection class |
I |
| Suitable for rooms |
Office |
| Shape |
Rectangle |
Lamps
| Compatible bulb types |
Fluorescent |
| Included bulb power |
49 W |
| Compatible bulb energy efficiency classes |
A, A+, B |
| Number of bulbs |
2 |
Additionally
| Energy efficiency compliance |
A+ |
A, A+, B, IP20, 2x T5 35/49 W
Luminaire type
Surface-mounted luminaire for single luminaire or continuous line applications for 2 T5 fluorescent lamps 35/49 W.
Applications
Offices, Sales rooms, Banks, Ticket halls.
Mounting methods
For mounting to ceilings and overhangs indoors.
Optical system
With ultra-low cross-section louvre, highly specular. With reflection-intensifying coated silver surface. Reflectance value 98%, share of diffused reflections < 3%. Suitable for VDU workstations according to EN 12464-1 via limited luminance L ≤ 1500 cd/m² for beam angle above 65° all-round. Louvre mounting and self-actuating electrical earthing via sliding contact catches. Louvre can be hinged downwards and unhooked on both sides without tools.
Luminaire body
Luminaire body of sheet steel, powder-coated, Colour white (RAL 9016). Dimensions (L x W) 1493 mm x 160 mm, luminaire height 53 mm. Installation dimensions of end cap for end luminaire or single luminaire use is 11 mm per end cap. Please order end caps for individual luminaires or continuous lines separately. Rectangular design with 40 mm wide rim. Luminaire body with integral coupling profiles for precise alignment of continuous lines with non-interrupted louvres.
Electrical version
With electronic ballast, digitally dimmable (DALI).
When the luminaire is connected to a halogen-free power cable, the cable must be protected by a heat shrink tube (TOC 6361200). This enables long-term damage to cable insulation caused by exposure to fluorescent lamp light to be avoided. For correct operation of the lamps in dimmable luminaires, burn-in time specified by the lamp manufacturer must be carried out upon initial commissioning.
