Power
Power factor |
0.6 |
Input operation voltage (max) |
230 V |
Input operation voltage (min) |
83 V |
Efficiency |
94% |
Maximum current |
6 A |
Power supply input frequency |
50/60 Hz |
Surge energy rating |
570 J |
Output power capacity |
700 VA |
Output operation voltage (min) |
120 V |
Output voltage regulation |
-21, +8% |
Output power |
450 W |
Performance
Waveform |
Sine |
Audible alarm(s) |
Y |
UPS topology |
Line-Interactive |
EMI/RFI noise filtering |
Y |
Cooling type |
Active |
Power protection features |
Over voltage, Under voltage |
Number of input phases |
1 |
Automatic Voltage Regulation (AVR) |
Y |
Ports & interfaces
Modem (RJ-11) ports |
1 |
Power plug |
NEMA 5-15P |
AC outlets quantity |
6 AC outlet(s) |
Battery
Hot-swap battery |
Y |
Battery recharge time |
4 h |
Typical backup time at half load |
54.5 min |
Typical backup time at full load |
22.2 min |
Replacement battery cartridge |
RBC54 |
Cold start |
Y |
Other features
Nominal output voltage |
120 V |
SmartPro 120V 700VA 450W Line-Interactive Sine Wave UPS, Dual Voltage, Extended Run, SNMP, Webcard, Tower, USB, DB9 Serial
Tripp Lite's dual-voltage SMART700DV line-interactive UPS system maintains 120V nominal output when fed with North American 120V or international 230V input voltage. Protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 54.5 min. half-load runtime and 22.2 min. full load runtime during power failures. 700VA/450W power handling capability supports a variety of networking, telecom and other applications, including multiple network workstations. Includes 6 UPS-supported outlets. Supports remote monitoring of UPS and site power conditions via built-in USB and RS-232 enabled DB9 ports. Works with PowerAlert UPS monitoring and unattended shutdown software available via free download. Includes complete USB and serial cabling. Built-in audible alarm and 5 front panel LEDs indicate status of line power, battery power, battery low/replace, voltage regulation and load level. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges.
- Tripp Lite's dual-voltage SMART700DV line-interactive UPS system maintains 120V nominal output when fed with North American 120V or international 230V input voltage
- Includes detachable input cord with NEMA 5-15P input plug
- Built-in C14 inlet supports a variety of user-supplied international high- and low-voltage input cables
- Protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges
- Large internal batteries offer 54.5 min. half-load runtime and 22.2 min. full load runtime during power failures
- 700VA/450W power handling capability supports a variety of networking, telecom and various other applications types, including multiple network workstations
- Includes 6 UPS-supported outlets
- Supports remote monitoring of UPS and site power conditions via built-in USB and RS-232 enabled DB9 ports
- Works with PowerAlert UPS monitoring and unattended shutdown software, available via free download
- Includes complete USB and serial cabling
- Built-in audible alarm and 5 front panel LEDs indicate status of line power, battery power, battery low/replace, voltage regulation and load level
- Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges
- Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases