Power
Power factor |
0.6 |
Efficiency |
94% |
Maximum current |
10 A |
Power supply input frequency |
50/60 Hz |
Surge energy rating |
480 J |
Output power capacity |
1500 VA |
Output operation voltage (min) |
220 V |
Output operation voltage (max) |
240 V |
Output voltage regulation |
-15, +8% |
Output power |
940 W |
Ports & interfaces
Serial ports quantity |
2 |
Power plug |
C14 coupler |
AC outlets quantity |
6 AC outlet(s) |
Performance
Waveform |
Sine |
Audible alarm(s) |
Y |
UPS topology |
Line-Interactive |
EMI/RFI noise filtering |
Y |
Power protection features |
Over voltage, Under voltage |
Number of input phases |
1 |
Automatic Voltage Regulation (AVR) |
Y |
Battery
Hot-swap battery |
Y |
Battery recharge time |
4 h |
Typical backup time at half load |
20 min |
Typical backup time at full load |
7 min |
Replacement battery cartridge |
RBC53 |
Cold start |
Y |
SmartPro 230V 1.5kVA 940W Line-Interactive UPS, Tower, DB9 Serial
Tripp Lite's SMARTINT1500 intelligent, line interactive UPS system protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 20 minutes half load runtime and 7 minutes at full load during power failures. 1500VA/940 watt power handling capability supports a variety of networking, telecom and various other application types, including the support of multiple network workstations. Includes a total of 6 IEC320-C13 outlets. Supports remote monitoring of UPS and site power conditions via built-in DB9 serial and DB9 contact closure ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Built-in audible alarm and 5 front panel LEDs indicate status of line power, battery power, battery low/replace, voltage regulation and load level. Wall mountable with optional UPSWM wallmount bracket. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges. Attractive, small-footprint tower.
- 1500VA/940 watt power handling capability supports a variety of networking, telecom and various other application types
- Built-in voltage regulation and battery support, plus complete AC suppression prevents equipment damage, data loss and downtime
- Large internal batteries offer 20 minutes half load runtime and 7 minutes at full load during power failures
- Automatic Voltage Regulation (AVR) circuits with two boost and one voltage reduction level maintains usable 230V nominal output over an input voltage range of 165-277V
- Includes 1 DB9 serial and 1 DB9 contact closure monitoring port for remote monitoring of UPS status and site power conditions
- Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power-restored, AC line voltage, DC battery voltage and battery capacity
- PowerAlert UPS monitoring and unattended shutdown software with complete cabling included
- Includes 6 UPS-supported outlets
- Notification of system status via 5 LEDs and multi-function audible alarms