Power
| Power factor |
0.7 |
| Efficiency |
94% |
| Maximum current |
11.3 A |
| Power supply input frequency |
50/60 Hz |
| Surge energy rating |
480 J |
| Output power capacity |
2200 VA |
| Output operation voltage (min) |
220 V |
| Output operation voltage (max) |
240 V |
| Output voltage regulation |
-19 +8% |
| Output power |
1600 W |
Performance
| Noise level |
47 dB |
| Waveform |
Sine |
| Audible alarm(s) |
Y |
| UPS topology |
Line-Interactive |
| EMI/RFI noise filtering |
Y |
| Cooling type |
Active |
| Power protection features |
Over voltage, Under voltage |
| Number of input phases |
1 |
| Automatic Voltage Regulation (AVR) |
Y |
Ports & interfaces
| Serial ports quantity |
2 |
| Power plug |
C20 coupler |
| AC outlets quantity |
9 AC outlet(s) |
Battery
| Hot-swap battery |
Y |
| Battery recharge time |
4 h |
| Typical backup time at half load |
19 min |
| Typical backup time at full load |
7 min |
| Replacement battery cartridge |
RBC54 |
| Cold start |
Y |
Other features
| Output connections |
8 x C13\n1 x C19 |
| Nominal input voltage |
230 V |
SmartPro 230V 2.2kVA 1.6kW Line-Interactive UPS, Tower, SNMP, Webcard, USB, DB9 Serial
Tripp Lite's SMARTINT2200VS intelligent, line interactive tower uninterruptible power supply (UPS) prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Large internal batteries offer 19 minutes half load runtime and 7 minutes at full load. Maintains regulated 230V nominal output without using battery power during brownouts and overvoltages from 151 to 282V. 2200VA power handling capability offers compatibility with a variety of networking, telecom and other sensitive electronic applications. Includes a total of 9 outlets with 3 load banks (2 outlets each) that are individually switchable via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive gray color scheme.
- SMARTINT2200VS line interactive UPS offers protection from blackouts, brownouts, overvoltages and surges
- 2200VA / 1600 watt capacity
- Internal batteries support a half load of 1100VA for 19 minutes and a full load of 2200VA for 7 minutes
- Maintains regulated 230V nominal output during brownouts and overvoltages from 151 to 282V
- Includes 9 UPS supported outlets with 3 individually controllable load banks that can be powered off and back on again via software interface
- IEC320-C20 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles
- PowerAlert UPS monitoring and unattended shutdown software included
- Offers simultaneous monitoring by up to 4 directly-connected devices through included USB and DB9 interface ports, or the monitoring by any number of additional servers over IP with included PowerAlert monitoring software.
- Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
