Data transmission
| MAC address table |
4000 entries |
| Switching capacity |
7.2 Gbit/s |
| Jumbo frames |
9600 |
| Packet forwarding rate (1 Gbps) |
1488000 pps |
| Packet forwarding rate (100 Mbps) |
148800 pps |
| Throughput |
5.4 Mpps |
| Number of multicast groups filtered |
16 |
| Packet forwarding rate (10 Mbps) |
14880 pps |
Networking
| Port mirroring |
Y |
| Broadcast storm control |
Y |
| VLAN support |
Y |
| IGMP snooping |
Y |
| Auto MDI/MDI-X |
Y |
| Tagged VLAN |
Y |
| Rate limiting |
Y |
| Port-based VLAN |
Y |
| Flow control support |
Y |
| DHCP client |
Y |
| 10G support |
N |
| Full duplex |
Y |
Power over Ethernet (PoE)
| Power over Ethernet (PoE) power per port |
30 W |
| Total Power over Ethernet (PoE) budget |
250 W |
| Power over Ethernet (PoE) |
Y |
| Power over Ethernet (PoE) ports quantity |
16 |
| Power protection features |
Overload |
Ports & interfaces
| Basic switching RJ-45 Ethernet ports quantity |
16 |
| Copper ethernet cabling technology |
100BASE-TX, 10BASE-T, 1000BASE-LX, 1000BASE-SX |
| Basic switching RJ-45 Ethernet ports type |
Fast Ethernet (10/100) |
| Combo SFP ports quantity |
2 |
Performance
| Packet buffer memory |
2.75 MB |
| Firmware upgradeable |
Y |
| Flash memory |
1 MB |
| Auto-negotiation |
Y |
Management features
| Quality of Service (QoS) support |
Y |
| Web-based management |
Y |
Ttec PSF16-2CRW. Switch type: Managed network switch, Switch layer: L2. Basic switching RJ-45 Ethernet ports type: Fast Ethernet (10/100), Copper ethernet cabling technology: 10BASE-T,100BASE-TX,1000BASE-LX,1000BASE-SX. Networking standards: IEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ad,IEEE 802.3af,IEE. MAC address table: 4000 entries, Switching capacity: 7.2 Gbit/s, Throughput: 5.4 Mpps. Security algorithms: SNMP