Features
| Hot-swap handle |
Y |
| Module height |
Middle size |
| ECC |
Y |
| Processor frequency |
2 GHz |
| Power supply |
45 W |
| AMC standards |
AMC.0, AMC.1, AMC.3, AMC.2 |
| Processor cache |
8 MB |
| Module width |
Double width |
| Processor cores |
4 |
| IPMI version |
2.0 |
Operational conditions
| Operating vibration |
1 G |
| Operating shock |
160 G |
Ports & interfaces
| SFP/SFP+ slots quantity |
2 |
| Micro-USB ports quantity |
4 |
| DVI-I ports quantity |
1 |
Additionally
| Graphics controller |
SM750 |
| Ethernet LAN (RJ-45) ports quantity |
2 |
| Ethernet LAN connection |
Y |
µTCA.4 PrAMC, Intel Xeon E3 1125, RJ-45 , micro USB, DVI, 45 W
The AMC725 is a Processor AMC (PrAMC) in a µTCA.4 double-module, mid-size AMC form factor. It features an Intel® Xeon E3 Processor with Cave Creek PCH, and on-board dual RAID options. The module provides PCIe Gen2 x4 or single x8 on ports 4-11 per AMC.1, dual GbE on ports 0 and 1 per AMC.2, and SATA on ports 2 and 3 per AMC.3. Dual 10 GbE ports are included on the front panel.
The AMC725 comes with 16 GB of DDR3 memory with ECC. It routes PCIe, USB and SATA signals to the RTM connector for further expansion. The Serial over LAN with hardware RNG (Random Number Generator) acts as a seed generator for authentication. The BIOS allows booting from on-board Flash, off-board SATA, PXE boot, and USB.
- with Graphics Interface
- Double-module, mid-size
- per AMC.0 and MTCA.4
- Intel® Xeon E3 (Gladden) 4C, 2 GHz
- 8 MB LLC processor and Cave Creek PCH
- DVI graphics (SM750 w/ 16 MB DDR)
- up to 1920x1440 resolution
- Optional up to 256 GB SSD with RAID option
- PCIe Gen3 on ports 4-7 and 8-11 or single PCIe x8 on ports 4-11 (AMC.1)
- GbE on ports 0 and 1 (AMC.2) and SATA on ports 2 and 3 (AMC.3)
- PCIe Gen3 x8, dual SATA and quad USB to RTM
- Dual 10GbE via SPF+ and dual GbE via RJ-45 to front panel
- Up to 16 GB DDR3 w/ ECC
- IPMI 2.0 compliant
- Serial over LAN (SOL) with hardware RNG
