Networking
| Cable types supported |
Cat6, Cat5 |
| Duplex system |
Half, Full |
| Auto-negotiation |
Y |
Power
| Power over Ethernet (PoE) |
Y |
| Output current (12V) |
1 A |
| Output current (24V) |
1 A |
| Total Power over Ethernet (PoE) budget |
7 W |
| Input voltage |
12 V |
Performance
| Maximum transfer distance |
350 m |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
1 |
| Transfer rate (Mbps) |
200 Mbit/s |
Coax to Ethernet Converter with PoE, 7W, class1, Black
<b>Coax to Ethernet with universal POE</b>
HIGHWIRE POE turns existing video infrastructure into a fast network connection, and converts legacy 12V or 24V power into a universal Power over Ethernet (POE) supply for IP cameras and mega-pixel cameras. This saves the time and cost of replacing old analog cabling, with no need to install extra power for the new camera. Instant operation with no configuration required makes installation of HIGHWIRE POE simple and fast.
<b>Long connection range</b>
Veracity's HIGHWIRE technology can provide a full-duplex 100BASE-T network connection, with no bandwidth restrictions, over up to 500 metres (1650 feet) of RG-11 cable, or 280 metres (930 feet) of CCTV-grade RG-59 cable.
Simply connect the HIGHWIRE POE by the IP camera, and a regular HIGHWIRE at the other end of the cable, and the connection will be established automatically with no configuration required.
<b>Transparent to the network</b>
The HIGHWIRE connection is invisible to Ethernet data and requires no MAC or IP address; to the camera the link looks like any other network cable.
Speed, duplex and crossover are sensed on connection; no setting up is necessary.
<b>Universal power</b>
HIGHWIRE POE can be powered by legacy 12 Volt DC or 24 Volt AC supplies. Connection is via a detachable screw terminal and the type and polarity of the supply are detected automatically.
An optional power supply is available for installations with no legacy power.
HIGHWIRE POE automatically detects and enables power to IP cameras using the universal IEEE 802.3af standard. Up to 6.5 watts of power is available to Power Class 1 or 2 devices.
<b>Practical installation</b>
With absolutely no setting-up or configuration required, installation is simple, and HIGHWIRE POE's compact dimensions allow it to be mounted inside a camera housing.
Optional wall-mounting brackets and a rack-mounting kit are available to suit the needs of each installation.
