Ports & interfaces
| Video ports quantity |
5 |
| Video port type |
HDMI |
Power
| Input voltage |
100-240 V |
| Input frequency |
50/60 Hz |
Technical details
| Maximum cable length |
1.8 m |
| Maximum operating distance |
15 m |
HDMI Splitter, 10.2Gbps, 340 MHz, 4K @ 30Hz, Deep Colour, Lip Sync
The Techconnect3 HDMI14 distribution amplifier with one input and four outputs. It has a fully revised design with faster 10.2 Gbps bandwidth and handles resolutions up to 4K (4,000 pixels wide). Applications include digital signage, meeting rooms, lecture theatres, home cinemas – anywhere you need to duplicate an HDMI signal.
<b>Supports 3D</b>
As an HDMI v1.4a device it supports 3D at 1080P (but not 4K), Deep Colour, Lip Sync.
<b>HDCP Authentication</b>
Features HDCP (copy protection) management which continuously authenticates HDCP encryption between all devices, ensuring simultaneous distribution of source content to all displays.
<b>Slim Chassis</b>
This is Vision’s smallest HDMI splitter yet! Measuring just 140 x 64 x 24mm.
<b>15m (50′) Output</b>
Supports a signal transmission distance of up to 15 metres at 4K/12-bit colour when used with a standard Vision 15 metre cable. Note: distance can vary depending on signal resolution, cable quality, graphics card, and display.
<b>Noise Reduction</b>
This distribution amplifier ensures signal integrity by equalizing and regenerating the incoming signal. It reshapes marginal or noisy HDMI signals eliminating noise and reducing jitter from marginal HDMI sources, ensuring a strong, stable digital signal.
<b>EDID Management</b>
Fully automatically EDID management allows fast setup.
<b>Status Indicators</b>
An input LED lights when you have connected the source. Output LEDs show which ports have displays attached, helping to trouble-shoot issues.
