Weight & dimensions
| Receiver depth |
92 mm |
| Receiver height |
23.5 mm |
| Receiver width |
55 mm |
| Receiver weight |
200 g |
| Transmitter depth |
48 mm |
| Transmitter height |
21 mm |
| Transmitter width |
55 mm |
Ports & interfaces
| RJ-45 ports quantity (receiver) |
1 |
| RJ-45 ports quantity (transmitter) |
1 |
| DC-in jack |
Y |
Performance
| Maximum transfer distance |
150 m |
| Type |
Network transmitter & receiver |
| Data transfer rate |
200 Mbit/s |
Additionally
| Ethernet LAN (RJ-45) ports quantity |
2 |
TC3 USBTP USB-over-CAT6 Module
The Techconnect USBTP is a USB extender which converts USB to run over a “twisted pair” network cable, allowing flexible placement of the AV faceplate with respect to the interactive flat panel. No drivers are required.
150 metres
Converting the signal to run over a twisted-pair cable – also known commonly as “CAT5” or “Ethernet” – allows the signal to travel up to 100m on CAT5e, or 150m on CAT6. The USB input cable can be up to 5m long, and the output cable can be as long as 10m. Vision recommends high quality Techconnect USB cables.
Modular
As part of the Techconnect family of products it comes with a transmitter in the form of a modified USB-B module. Fix it into place on any Techconnect faceplate.
Powered
A power supply is included which connects to the receiver. For shorter cables this external power may not be necessary, but many interactive display devices only work reliably if they receive full power USB.
Status LED
A new feature on this updated version are two LED lights which help installers trouble-shoot issues. One light confirms connection with the other end, and the other shows data transfer.
Webcam-Ready
As well as interactive whiteboard and flat-panel applications, the Techconnect USBTP can be used for any other USB devices which work on USB 2.0 such as printers and webcams.
Plug and Play
All parts are included in one box. Just install the transmitter module into the faceplate, and mount the receiver at the remote USB device.
