Vision TM-WB mounting kit

TM-WB Whiteboard Wall Bracket The TM-WB allows teachers to engage with their audience in a more interactive way by lowering the whiteboard to the student’s height. It is a totally universal wall mount for whiteboards and short-throw projectors. Because the weight is carried by two floor-standing legs this stand is simpler and safer to install.

Applications are not just limited to interactive whiteboards; any flat-panel wider than 1050mm can be accommodated.

<b>Adjustable Whiteboard Clamps</b>
Adjustable arms attach to any board. All sizes from 57” or larger, with a thickness of 28-78mm can be fitted. The arms allow up/down and side-to-side adjustment of the board in relation to the projector.

<b>Wall Mount</b>
Two 1.2m tall legs are attached to the wall, then the wall frame assembly is hung on the legs and locked in place. Cables can be routed to the floor through legs.

<b>Or Portable</b>
An alternative portable version has four large castors and comes with counter weights and locking feet for stability.

<b>Height Range</b>
Maximum and minimum installation height is determined by the size of the whiteboard and the projector. Warning! In the lowest position the boom and projector can present a head height hazard

<b>Motorized</b>
A high quality linear-drive motor drives the board and projector up and down. These motors are quiet, precise and rated for 12,000 cycles.

<b>Control</b>
Activation is by a cable remote control.

<b>Telescopic Boom</b>
The1.5m boom is fabricated from lightweight aluminium to reduce load on the wall mount. It has a range of 800-1500mm. Can be cut shorter for ultra-short-throw projectors.

<b>Heavy-Duty</b>
The TM-WB is designed to take the weight of interactive whiteboards and touch-panel LCDs up to 50kg. The boom can take projectors up to 10kg.

<b>Rotating Boom</b>
The portable versions includes a rotating mechanism so the boom can swing 90 degrees to fit through doors.