Walimex 19754 RF Wireless camera remote control

Beta Transceiver, 433Hz, 16 Channels, up to 100m, 1/250s, 2x 3V AA, Sync 6.35mm/3.5mm, 84g, Black Beta Transceiver

The 16-channel radio remote trigger from walimex pro allows you to trigger your flash or your camera.

- 4in1 radio remote trigger for system and studio flashes as well as remote camera trigger (with cable or wireless)
- Suitable for Canon EOS, Nikon, Sony a. o.
- Transmitting frequency: 433MHz
- Reach up to 100 meters
- very high synchronisation rate of 1/250s
- Remote trigger modes: triggering and time exposure
- compatible with series walimex pro VE, VC and other studio flashes with IEC-320 male connector and sync socket with 3.5mm or 6.3mm jack (sync plug))

Content
- 1 x trigger set with transmitter and receiver,
- 4x synch cords ,
- 2x adapter jack 3.5 mm,
- 2x carrier straps,
- 1 x instructions for use,
- 2x Trigger Cable (3C/1C),
- 4x AA Battery

Description
Wireless triggering over a distance of up to 100 meters
The 16-channel radio remote trigger from walimex pro allows you to trigger your flash or your camera. No matter whether with cable or wireless, the remote trigger can be flexibly used and has been specially designed for various cameras with a reach of up to 100 meters. The receiver can be mounted to the studio flash via sync cord and can be triggered with the transmitter by hand or mounted to the flash shoe mount. When using a compact flash the device can simply be plugged on to the receiver and fastened to the tripod with the ¼ inch thread.
Flexible use
With a high synchronisation rate of 1/250 seconds it is most suitable for extremely fast flashing sequences and the 16 possible channels also allow you to trigger several flashes. It can, however, also be used as a simple remote camera trigger and as a trigger for time exposures. The scope of delivery also contains two carrying straps for easy handling. These devices are transceivers, i.e. they can act as receivers or as transmitters.