Networking
Supports ISDN connection |
N |
DSL features
Downstream data rate |
24 Mbit/s |
xDSL connection type |
ADSL |
Operational conditions
Non-operating relative humidity (non-condensing) |
5 - 95% |
Management features
Universal Plug and Play (UPnP) |
Y |
Other features
Input frequency |
50/60 Hz |
Input voltage |
100 - 240 V |
Protocols
DHCP client |
Y |
DHCP server |
Y |
Supported protocols |
ANSI T1.413 (Full Rate ADSL)\nITU G.992.1 (DMT)\nITU G.992.2 (G.lite)\nITU G.992.3 (ADSL2)\nITU G.992.5 (ADSL2+)\nITU G.994.1 (G.hs)\nITU G.997.1\nZhone ReachDSL 2.2 |
Ports & interfaces
RJ-11 ports quantity |
1 |
USB ports quantity |
1 |
DC-in jack |
Y |
Additionally
Ethernet LAN connection |
Y |
Wireless technologies |
Wired |
Ethernet LAN (RJ-45) ports quantity |
1 |
6382-A1-200 - 4 port - ADSL2
With Zhone's innovative, easy to use ADSL/R CPE family, service providers can provide ADSL2+ service and ReachDSL service in the same unit, ensuring coverage to the entire subscriber base. The 6300 CPE family provides enhanced remote diagnostic tools that allow the service provider to remotely access this enhanced endpoint for quick trouble isolation in order to maintain the highest level of service.
The Zhone 6300 enhanced CPE are easily user-installed. The embedded web-based user interface is designed to simplify ADSL deployment. All products provide an Ethernet connection that is auto-sensing, eliminating the worry about connection cable type (straight-through vs crossover). All units include a built in POTS filter that eliminates the expense of an external filter as well as reduces installation errors.
The 6300 enhanced CPE all default to a simple bridge. This and other default settings make for a quick and easy installation that doesn't require any configuration.
When operating in router mode, these gateways support DHCP Server/Relay/Client, NAPT, as well as RIP, dynamic routing, port forwarding, static routing, and ping initiation. For security firewall functions including PAP (Password Access Protocol) and CHAP (Challenge Handshake Authentication Protocol) are supported.
The 6382 multiport Ethernet CPE and the 6388 multiport Ethernet CPE with wireless access incorporate an Ethernet switch rather than a hub and provide versatile solutions for the deployment of residential and business customers including packet voice and video services.
In addition all of the CPE that make up the 6300 family support the key OpIQ feature DELT to help service providers debug subscriber service issues. DELT, or Dual End Loop Test, is a feature that is present in Zhone's ADSL2+ DSLAMs and BLCs and is also a feature of Zhone ADSL2+ CPEs. Because DELT is a dual-ended test, it requires equipment that supports the DELT feature at both ends of the copper loop.
DELT is primarily used for reactive tests on a loop after a modem has been deployed—either to help troubleshoot a line or to capture a baseline of loop characteristics at the time of installation.