Performance
Type |
Network transmitter & receiver |
Data transfer rate |
11.4 Mbit/s |
Operational conditions
Non-operating altitude |
-60 - 5000 m |
Additionally
Ethernet LAN (RJ-45) ports quantity |
1 |
EtherXtend EAD, N2N, 1PRT SHDSL.BIS WAN, 1PRT 10/100BT LAN, Subscriber, AC Power w/US Plug
<b>EtherXtend SHDSL Ethernet Access Device supports loop bonding up to 11.4 Mbps</b>
Zhone's EtherXtend 2100 SHDSL Series of Ethernet Access Devices (EADs) allows Carriers, CLECs, ISPs and PTTs to deliver Ethernet services to their customers simply, quickly and cost-effectively over existing copper plant. Intended for deployment at end-users' locations, these devices allow delivery of Ethernet services using the latest in SHDSL.bis transport protocols.
The EtherXtend 2100 Series of EADs represent the next generation of simple, configuration-free, plug & play Ethernet over Copper Network Extenders available from Zhone Technologies. By employing Zhone's pre-standards based, Net-to-Net (N2N) bonding protocols, these units continue to build on the simplicity and popularity of Zhone’s SHDSL Network Extenders (SNE) family of products, while extending the data rates available to a full 5.7Mbps per pair, in compliance with the ITU-T G.991.2 SHDSL.bis standards.
The EtherXtend 2100 Series of EADs are available in 1-port and 2-port configurations. The 2-port unit supports loop bonding, and enables transmission rates of up to 11.4 Mbps over two copper pairs. As with all of Zhone's EtherXtend EAD product family, the ETHX-21xx-SHDSL products share some common attributes - enhanced performance in a streamlined, low-cost architecture, designed for ease-of-use, rapid deployments, and low-density applications.
The EtherXtend 2100 SHDSL products can interoperate with each other in a point-to-point (i.e. book-ended) configuration. Where several of these devices must home on a common central office (CO) location, CO aggregation can be achieved using the ESIM5700-48 line card of Zhone's IP-DSLAM (IPD) platform. Alternatively, service providers can use Zhone's Single Line Multi-Service (SLMS) family of products (e.g. MALC or ETHX-3300/3400 Series EADs) as aggregation devices for the ETHX-21xx EADs.
What differentiates Zhone's EtherXtend 21xx EADs from competing vendors' offerings is the simplicity and efficiency with which Ethernet services can be deployed over bonded loops with a minimum of fuss and/or operational complexity - only made possible by the automatic, configuration-free, "plug & play" operation of Zhone's EtherXtend SHDSL product line. While most customers value the simplicity of a configuration-free device, the EtherXtend 2100 Series EADs have been recently upgraded to allow IP based management schemes, with the addition of an integrated DHCP client and enhanced OAM functionality (via WEB GUI, SNMP, and CLI interfaces).