Technical details
| Seasonal efficiency rating (cooling) (SEER) |
5.6 |
| Operating temperature (heating) (T-T) |
-15 - 30 °C |
| Compressor type |
Rotary |
| Cooling capacity in watts (min) |
4200 W |
| Cooling capacity in watts (max) |
6700 W |
| Heating capacity in watts (min) |
4480 W |
| Heating capacity in watts (max) |
7200 W |
| Operating temperature (cooling) (T-T) |
0 - 50 °C |
| Refrigerating medium |
R410A |
| Inverter technology |
Y |
| Suitable for room volume up to |
185 m³ |
| Seasonal efficiency rating (heating) (SCOP) |
3.8 |
| Timer |
Y |
| Type |
Split system air conditioner |
Indoor unit
| Indoor unit depth |
188 mm |
| Indoor unit height |
275 mm |
| Indoor unit width |
800 mm |
| Noise level (indoor unit) |
58 dB |
| Indoor unit weight |
17000 g |
| Indoor unit International Protection (IP) code |
IP20 |
Outdoor unit
| Outdoor unit width |
845 mm |
| Outdoor unit depth |
320 mm |
| Outdoor unit height |
700 mm |
| Outdoor unit weight |
48000 g |
| Noise level (outdoor unit) |
63 dB |
| Outdoor unit International Protection (IP) code |
IP24 |
Power
| Annual energy consumption (heating) (Average heating season) |
2063 kWh |
| Power consumption (cooling) (max) |
1840 W |
| Power consumption (heating) (max) |
1750 W |
| Annual energy consumption (cooling) |
338 kWh |
SM33 Duo - 2.7 kW, 230 V, 50 Hz
Flexible matching of multiple indoor units with only 1 outdoor unit: This air conditioning set can be operated with one up to two indoor units on one outdoor unit. Saving the investment for an eventual second outdoor unit when a consumer needs two indoor units. The indoor units can run independently from each other. It is not possible that one (or more) indoor unit is heating and other indoor unit is cooling. Heating is leading.
Cooling + dehumidifying + heating (heat pump): The air conditioning is a complete air treatment system. It can cool, dehumidify and heat the air.
Air conditioning: In COOLING mode the unit produces a pleasant and refreshing cool airflow.
Heating: In HEATING mode the unit produces a warm and comfortable airflow. Also the free of charge energy from the outdoor air is used to increase the efficiency of the system.
Dehumidifying: In DRY mode the unit dehumidifies the air in the room as efficient as possible. Note: In COOLING mode the air is also dehumidified.
Inverter technology: maximum comfort: The Zibro DC Inverter Wall Mounted Split air conditioner continuously adjusts the cooling and heating capacity according the desired room temperature. When the desired temperature is reached, the compressor speed is gradually decreased to maintain the room temperature with a minimum of variation. By varying gradually the compressor capacity, the expected lifetime as well as the experienced comfort level will increase. Looking at the experienced comfort level for the user of the inverter system: Non-inverter air conditioners, which operate at a constant speed, must turn on/off the compressor to control the room temperature causing less comfortable temperature fluctuations.
Inverter technology: minimum energy consumption: The compressor starts to slow down as the room
temperature reaches the desired temperature. As a result, the over all power consumption is reduced significantly (up to 35% less than non inverter/ conventional types).
