Other features
| MAC address table |
4000 entries |
| Cabling technology |
10/100Base-T(X) |
| Electromagnetic emissions |
FCC, EN, ETSI |
| Management platform |
CLI |
| Non-operating relative humidity (non-condensing) |
10 - 95% |
| Management protocols |
SNMP v1/v2, FTP/TFTP |
| Safety |
UL, CSA, IEC |
| Mac compatibility |
N |
| Compliance industry standards |
IEEE 802.3u, 802.3x |
| Networking features |
Fast Ethernet |
Performance
| Data transfer rate |
10 Mbit/s |
IES-1000M, 48.26 cm (19 ") 1U, SHDSL/ADSL/ADSL2+, Fast Ethernet
Flexible Provisioning of DSL and VoIP services
- Multi-service Access Node, AC or DC power input with two slide-in slots for various DSL and VoIP line modules .
- 12-port ADSL/ADSL2/ADSL2+ line module with a splitter built-in for MTU application.
- 8-port G.SHDSL or 16-port G.SHDSL.bis line modules with M-pair bonding feature for business applications
- 24-port VoIP line module with SIP signaling protocol and MLT function support
- Line module cascading with fast ethernet uplinks
- 802.1p QoS, priority queuing, 802.1q VLAN tagging and multicasting support
- 802.1x authentication, MAC/Packet filtering and ACL filtering support
- Manageable with the Windows-based Element Management System (EMS).
Comprehensive design for various market demand
IES-1000 is a pizza box IP-based multi-service access node (MSAN). It has two slots for various combinations of DSL and VoIP line modules to provide ADSL2+, G.SHDSL and VoIP services to residential and business customers. It terminates the ATM traffic of DSL connections and POTS voice signals to make them IP packets and route them through IP networks. With the highly compact design (1U heigh), AC and DC power input as well as simple installation, IES-1000 can be deployed at Telco and SMB environment to meet all kinds of market demands.
Robust ADSL2+ Solution for Multiple Tenant Unit (MTU) Services
With ADSL2+ line module, service providers can offer residential users high-bandwidth internet access, on-demand entertainment services and IPTV services on a single network connection. The IES-1000 also offers businesses subscribers IP connectivity, VPNs, VLANs, high-quality video conferencing and legacy service interconnection with bandwidth up to 24Mbps per port. Moreover, it supports ATM-based 2-port bonding to provide even higher bandwidth to distant customers. The ADSL2+ line module is a sophisticated device fully compliant with existing standards and with modern features like energy-saving, excellent performance and transparent backward to ADSL/ADSL2 compatibility.
Lease Line G.SHDSL Service for Enterprise
With G.SHDSL technology, the IES-1000 is applicable for lease line replacement. Using the TC-PAM modulation technique, IES-1000 is compatible with other existing transmission technologies, allowing service providers to deploy at locations where broadband services already exist.
M-Pair Bonding G.SHDSL.bis Solution
IES-1000 supports the new-generation G.SHDSL.bis line module to provide transmission rate up to 4096kbps symmetrically in a single pair. It also comes with two 100Mbps Ethernet interfaces toward Ethernet aggregation network. One IES-1000 can accommodate two SAM1216-22 modules to support 32 SHDSL connections. In addition, the SAM1216-22 supports ITU G.991.2 m-pair bonding in a physical layer manner. The m-pair bonding can be 2 or 4 pairs and the aggregated payload rate is around 16Mbps.
VoIP line module to provide media gateway feature
In addition to FAX and modem services, VoIP line module provides a parallel and distributed media gateway architecture to empower VoIP services by taking advantage of POTS voice signals,. With the architecture, the line module serves up to 24 POTS ports. As part of the benefit, there is no throughput bottleneck or single-point failure issue in this architecture, The media gateway provides G.711, G.723, G.726, G.729a/b and T.38 codecs while RFC3261 SIP network signaling protocols is supported.
Extensive Management Capabilities
The entire IES-1000 system can be administrated remotely with the Windows-based NetAtlas Access EMS (Element Management System) based on the SNMP-manageable SNMPc platform. NetAtlas Access EMS provides powerful advanced remote management capabilities that help service providers minimize daily operational costs. Its loop-back design helps isolating network problems while the new firmware and IP Express configuration allow changes to be done remotely, eliminating the need for "truck rolls" in order to provision services to new customers or to reconfigure services for existing customers.
