Management features
| Multicast support |
Y |
| Quality of Service (QoS) support |
Y |
| Web-based management |
Y |
| MIB support |
RFC 1213 SNMP II, RFC 1215 SNMP, RFC 1493, RFC 1757 RMON I, RFC 1907 SNMP v2c, SMI v2 II, RFC 2096 IP, RFC 2233, RFC 2571 SNMP, RFC 2573 SNMP, RFC 2574 SNMPv3, RFC 2575 SNMP, RFC 2618 RADIUS, RFC 2620 RADIUS, RFC 2665, RFC 2674, RFC 2737, RFC 2819 RMON I, RFC 2863, RFC 2925, RFC 3414 SNMP SM, RFC 3415 SNMP ACM, RFC 3418 SNMP v2 |
Data transmission
| MAC address table |
8196 entries |
| Store-and-forward |
Y |
| Supported data transfer rates |
10/100/1000Mbps |
| Switching capacity |
3.6 Gbit/s |
| Maximum data transfer rate |
1 Gbit/s |
Other features
| Latency |
10 µs |
| Power supply type |
AC |
| Cabling technology |
10/100/1000Base-T(X) |
| Bandwidth |
19.2 Gbit/s |
Ports & interfaces
| SFP/SFP+ slots quantity |
1 |
| Console port |
RJ-45 |
| Fast Ethernet (copper) ports quantity |
8 |
| Copper ethernet cabling technology |
100BASE-TX, 10BASE-T |
| Combo SFP ports quantity |
1 |
| Basic switching RJ-45 Ethernet ports quantity |
9 |
Networking
| Broadcast storm control |
Y |
| IGMP snooping |
Y |
| Auto MDI/MDI-X |
Y |
| Rate limiting |
Y |
| Flow control support |
Y |
| DHCP client |
Y |
| 10G support |
N |
| Link aggregation |
Y |
| Spanning tree protocol |
Y |
| Full duplex |
Y |
Power over Ethernet (PoE)
| Power over Ethernet (PoE) |
Y |
Security
| MAC address filtering |
Y |
| Access Control List (ACL) |
Y |
| SSH/SSL support |
Y |
Protocols
| Management protocols |
IGMP, FTP, TFTP, SFTP |
Design
| Safety |
UL 60950-1, EN 60950-1, CSA 2.22 # 60950, IEC 60950-1, EU RoHS |
Additionally
| Wireless technologies |
Wired |
L2 Managed, Gigabit Ethernet, 9 x RJ-45, 2.22kg, Grey
Fully-Managed Layer 2, 10/100 Switching with Enterprise-Class Features
The 3Com Switch 4210 is a Layer 2 entry-level 10/100 LAN switch with enterprise-class QoS, security and management features, delivering high value for network administrators looking for an economical edge device.
Power over Ethernet (PoE) provided by this switch is ideal for voice over IP and wireless networking installations.
Setting them apart from lower-end "smart managed" devices, the Switch 4210 supports an industry-standard Command Line Interface (CLI), Web-based administration, and SNMP management.
Cluster together up to 32 devices for easy administration, with single IP management across 3Com switching lines— with mixed clusters of Switch 4210, 4200G, 4500G, 5500 and 5500G devices.
This switch has Gigabit uplinks; its combination ports can run in one of two modes: 10/100/1000 Mbps connections over copper Ethernet cabling, or 100 or 1000 Mbps over fiber cabling using SFP mini-GBIC technology.
The Switch 4210 comes with 3Com's lifetime warranty covering the unit, power supply and fan; Advanced Hardware Replacement with next business day shipment is available in most regions.
- Enterprise-class, entry-level and fully-managed Layer 2, 10/100 switching at an affordable price.
- Wirespeed, non-blocking performance.
- Fixed configuration, plug-and-play design means the switch work right out of the box.
- IEEE 802.1X network access control offers standards-based security combined with RADIUS authentication.
- Clustered stacking of up to 32 devices (Switch 4210, 4200G, 4500G, 5500 and 5500G).
- SFP ports support both Gigabit and Fast Ethernet fiber connections, making network migration easier.
- RADIUS Authenticated Device Access (RADA) provides authentication of attached devices via MAC address for an additional level of endpoint security.
- Power over Ethernet model delivers electrical power and data connectivity over a single Ethernet cable.
- Common operating system shared across all 3Com enterprise switches, which simplifies set-up and ongoing management.
