AV receivers Vision

Amplifier TC2-AMP2, 2 x 20W, White Vision TC2-AMP2 in wall amplifier module achieves 2 x 20w RMS (at 8 ohms) by using the latest digital amplifier chip technology. New digital technology allows us to fit the amplifier into a small compact design like the Vision TC2-AMP2. The Vision TC2-AMP2 can be surface mounted, wall mounted or used as an In wall amplifier for amplifying TV and Video audio.

Applications:

Vision TC2-AMP2 is perfect for classrooms and training rooms or single room home entertainment sound systems like Bedrooms, Bathrooms and conservatories or when you don't have room or space for a larger amplifier like the Vision AV-1301. The Vision amplifier module TC2-AMP2 can be either flush wall mounted or surface mounted or mounted into dado cable containment. The TC2-AMP2 wall amplifier can also be removed from its supplied housing and integrate as part of the Techconnect modular AV wall plate range for seamlessly connectivity and looks like part of the connector faceplate.

Two short input cables are included and typically connected to the rear of adjacent input modules on the VISION Techconnect AV Wall Plates or you can connect up to two sound input sources like a TV, Sky Box, CD player and Radio directly into the rear with the removable phoenix screw connectors or Input 1 is also duplicated on the front panel with a 3.5mm mini jack socket so you can plug your I-Pod, I-Phone, Mobile Phone or Computer directly into the front panel.

By using latest low-impedance digital amplifier chip technology the Vision Techconnect TC2-AMP2 wall amplifier module outputs a massive 2 x 20w RMS (at 8 ohms) but fits into the space of a Techconnect module, can be wall mounted or sunk into a partition wall having a minimum depth of 45mm

Green D-Class Amplifier

Vision TC2-AMP2 Digital wall amplifier use no power unless it is amplifying a sound, so even on at full volume; unless it is receiving input it is effectively off. Digital amplifiers also have the advantage of running cold so a bulky heat sink is not necessary… but don’t let it's size deceive you: the Techconnect TC2-AMP2 wall amplifier can drive into a 4 ohm load allowing you to power up to four speakers.
Easy to install:

Vision have paid special attention to creating a robust product that is simple and easy to install, the AV inputs, speaker outputs and power on the TC2-AMP2 wall amplifier are all via removable captive screw phoenix connectors which allow non-technical end users to install the amplifier very quickly.

The short input cables included are typically connected to the rear of adjacent input modules on the VISION Techconnect AV Wall Plates or you can connect up to two sound input sources like a CD player and Radio directly into the rear Or plug your I-Pod, I-Phone or Mobile Phone directly into the front panel.

LED Display:

A clear display makes the Vision Techconnect tc2-amp2 wall amplifier easy to use and a simple soft-control interface gives instant access to operate. Because the control panel can be installed anywhere in the room it is more convenient than traditional powered speakers where access to the controls can be awkward.

Remote Control: (Included)

The Techconnect TC2-AMP2 Wall Amplifier has an IR receiver positioned on the front for normal use and on the rear for integration with a control system such as the Techconnect Control² and includes a small hand held IR remote control hand set.

Power Supply: (Included)

The TC2-AMP2 wall amplifier uses a laptop style power transformer. To hide the power supply out of the way you can simply purchase a spare double-gang backbox (TC2BACKBOX2G) and blank surround (TC2SURR2GB) as shown in the Vision Techconnect product guide alternatively you can hide it away under a floor or In a ceiling void.