Audio amplifiers Fixapart
Here you can compare the prices for audio amplifiers Fixapart, get acquainted with photos and technical characteristics (for example Line level input (RCA), Subsonic filter frequency, Maximum input level, Woofer magnet type, Output power (DIN), Subsonic filter) and buy a liked model audio amplifiers in one of the reliable online stores.
-
Product catalogs to browse
-
2x RCA Female Audio + 1x DIN In, 2x RCA Female Audio + 1x DIN Out
This compact professional pre-amplifier is specially designed for adding a turntable to a stereo amplifier that has no phono input or to add a microphone input to an amplifier.
The microphone pre-amp section is designed to accept both Dynamic or Condenser microphones via a selection switch or a low level input such as guitar or telephone pick up. The phono pre-amp section features an extremely accurate RIAA record compensation response with very low noise and audio distortion. This high gain, low noise pre-amp is ideal for both home and professional studio and broadcast application.
Technical specifications:
- Input impedance: 47k Ohm phono, 600 Ohm microphone
- Input level: 3mV phono mode, 0.3mV microphone mode
- Gain: 40db both phono and microphone mode
- Signal/Noise ratio: >75db both phono and microphone mode
- Frequency response: 20Hz - 20kHz
- Equalisation: RIAA + 1db to -3db 20Hz-20kHz
- Output level: 200mV RMS
- Load impedance: >10k Ohm
- Overload margin: 23db
- Power: Adapter 220V - 12Vdc
- Included Adapter
The microphone pre-amp section is designed to accept both Dynamic or Condenser microphones via a selection switch or a low level input such as guitar or telephone pick up. The phono pre-amp section features an extremely accurate RIAA record compensation response with very low noise and audio distortion. This high gain, low noise pre-amp is ideal for both home and professional studio and broadcast application.
Technical specifications:
- Input impedance: 47k Ohm phono, 600 Ohm microphone
- Input level: 3mV phono mode, 0.3mV microphone mode
- Gain: 40db both phono and microphone mode
- Signal/Noise ratio: >75db both phono and microphone mode
- Frequency response: 20Hz - 20kHz
- Equalisation: RIAA + 1db to -3db 20Hz-20kHz
- Output level: 200mV RMS
- Load impedance: >10k Ohm
- Overload margin: 23db
- Power: Adapter 220V - 12Vdc
- Included Adapter
-
Payment Methods
We accept:
