HDD/SSD enclosures Lindy

SAS/SATA Back Plane System for 6x 2.5" Hard Drives, 13.335 cm (5.25 ") bay Add 6 2.5" HDDs to a single 5.25" expansion bay!

The LINDY SAS/SATA RAID Back Plane system is an internal drive housing that supports up to six 2.5" SAS/SATA hard drives in a single 5.25" expansion bay. It can easily be installed into a case or expansion system and is ideal for servers and workstations alike, allowing instant hot-swap access to the hard drives. To add RAID functionality, simply connect the back plane system to your computers RAID controller.

As the back plane system uses 2.5" SAS/SATA HDDs (not supplied) it consumes only a fraction of the power used by similar systems using 3.5" HDDs and requires less cooling - so is quieter to run.

- Supports 6 x 2.5" SAS and SATA II/1.0a HDDs (not included).
- Supports 9.5mm height HDDs.
- Dip switch to set LED and spin up behaviour between: LED flickering for HDD access and staggered HDD spin up; No LED flickering for HDD access and HDD spin up on power; Fits into a standard 5.25" expansion bay; RAID compatible when connected to a suitable RAID controller;
Supports hot swap function; 2 year warranty.

Technical Specifications

- For 6 x 2.5" SAS and SATA II/1.0a HDDs.
- Single bay 5.25" back plane module, with 6 x inner HDD tray.
- 2 ventilation fans (40 x 40 x 10mm) for high performance, high speed drive cooling.
- Hot Plug support - for extremely quick HDD changing/swapping and shortest down time.
- Metal aluminium body with metal HDD frames.
- LED for Power & HDD Activity.
- Internal HDD SAS dual data channel backplane connector, SATA drive compliant.