Motion Detectors Marmitek

Wireless motion sensor MS13 Switches lights and appliances on while present and switches them off later. Switches outdoor and indoor lights on when you come home in the evening. Saves energy by automatically switching lights and appliances off in empty rooms. Protects your home by early detection of unexpected visitors. Automatically route lights to the bathroom, for instance. Completely wireless. Splash waterproof for inside and outside use.

Imagine not having to tell your children every time to turn off the light in the basement when they come back up. The MS13 Motion Detector turns the light off automatically.

When you go to the toilet in the middle of the night, the lights in the hallway and in the toilet switch on automatically.

When you’re back in bed, all lights are switched off again.

If you come home in the dark, the lights are turned on. If you have an elaborate light plan, you can program this with macros in the CM11 Computer Interface.

The MS13 Motion Detector transmits wireless RF (radio) signals to the TM13 Transceiver Module or SC2800 Maxi Controller in a Marmitek Alarm System. The transceiver sends the signals on via the mains and switches lights and
appliances on or off.

The MS13 has a built-in photocell with two functions. The user can either activate the MS13 when it is dark or use the MS13 as a light/dark sensor. The motion detector and light/dark functions can also be combined. When a motion is
detected, a different address will be transmitted compared to when the photocell detects a difference between light and dark.
The MS13 cannot activate alarm functions in a Marmitek alarm system. In this situation the MS10 should be used.