Number locks Paxton
Here you can compare the prices for number locks Paxton, get acquainted with photos and technical characteristics (for example Colour of product, Material, Number of products included) and buy a liked model number locks in one of the reliable online stores.
-
Product catalogs to browse
-
Proximity keypad KP75, Screw connector
- Use with Switch2 or Net2
- Keypad and proximity reader all in one
- Read range up to 100mm with PROXIMITY cards
- Easy mounting
- Supplied with a choice of black or white bezels
- Low profile - less than 16mm deep
- 2 sizes
KP readers are a keypad and a proximity reader all in one. This allows card plus PIN (or code) access control with a single reader. KP readers are for use with Switch2 and Net2 systems. The readers are supplied with a choice of black or white bezels. Additional colours are available to Paxton Access registered installers free of charge.
The reader is wired as shown on the control unit label. Be sure to avoid mounting on metal surfaces or near other proximity readers as this will affect the read range. The cable exits centrally from the back of the reader making drilling and mounting very accurate.
A token is read by holding it within close proximity of the reader. Once a token has been read if the reader has been configured for code/PIN this must then be entered using the keypad. The control unit verifies the information and grants or denies access as appropriate. If access is granted the green LED flashes. If access is denied the red LED flashes.
- Keypad and proximity reader all in one
- Read range up to 100mm with PROXIMITY cards
- Easy mounting
- Supplied with a choice of black or white bezels
- Low profile - less than 16mm deep
- 2 sizes
KP readers are a keypad and a proximity reader all in one. This allows card plus PIN (or code) access control with a single reader. KP readers are for use with Switch2 and Net2 systems. The readers are supplied with a choice of black or white bezels. Additional colours are available to Paxton Access registered installers free of charge.
The reader is wired as shown on the control unit label. Be sure to avoid mounting on metal surfaces or near other proximity readers as this will affect the read range. The cable exits centrally from the back of the reader making drilling and mounting very accurate.
A token is read by holding it within close proximity of the reader. Once a token has been read if the reader has been configured for code/PIN this must then be entered using the keypad. The control unit verifies the information and grants or denies access as appropriate. If access is granted the green LED flashes. If access is denied the red LED flashes.
-
Payment Methods
We accept:
